1 Tonne
Features
- Heavy-duty construction
- Cast iron frame
- Four-position anvil
- Square ram
-
-
1.6mm Mild Steel CapacityOverview
The SHST-1.6HD is unique that its head has a deep throat of 205mm, this foot operated shrinker stretcher is ideal for mild steel sheet metal up to 16-gauge, 1.6mm in thickness. This is the perfect machine for working metal for auto, cycle or aeroplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity. Our metal shrinker stretcher has a rugged floor stand with foot pedal control to actuate the jaws allowing the hands to be free to properly work the material.Features
-
- 1.6mm mild steel capacity
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 205mm wide
- Easy foot pedal operation
- Strong steel stand provides an ideal working height
Includes
- 1 x set of shrinking dies
- 1 x set of stretching dies
-
-
Overview
Manufactured in Taiwan The BS-5S is step up from the BS-4A & BS-5 simply by the unique designed of the swivel head enables the material to be located in its original clamping position, therefore when cutting long material at an angle it wont interfere with other items around the work shop. This economically priced metal cutting band saw incorporates a wide and robust four-legged stand cross braced with four leg supports for additional stability when cutting longer and heavier material. The ball bearing guided blade can be driven at a choice of three speeds via a reduction gearbox, depending on the type of material being cut and there is an automatic cut-off, adjustable for height, for stopping the motor when the cut is complete. One notable feature on this saw is it supplied with an additional work table enabling the operator to use this machine in a vertical operation, ideal for maintenance shops, light steel fabrications, and engineering workshops. A well priced and very effective machine for cutting steel bars, angles, channels, tubes and so on.Features
- 200 x 125mm (W x H) rectangular capacity @ 90º
- 125mm round capacity @ 90º
- 80mm round capacity @ 45º
- 240V 0.5HP motor
- Ideal for cutting tube, pipe, solid steel, non-ferrous and wood
- 45º swivel head for easy angle cutting without moving the material
- Adjustable spring tension screw regulating cutting feed rate
- Fully-adjustable blade roller for accurate and straight cutting
- Adjustable length stop for repetition cutting
- 3-speed pulley drive system
- Automatic electric cut-out switch
- Vertical cutting table included
- Sealed worm and pinion gearbox drive
- Blade size: 1727mm x 13mm
-
(Please note this item requires a forklift to unload. Please contact us for freight costs)Overview
The Metalmaster HP-20PP 20 tonne workshop press has a variety of uses, ideal for removing and installing bushes, ball joints, bearings, gears, pulleys etc. The HP-20PP also has the added feature of a sliding head which can be moved to the side allowing for those offset pressing jobs. The 20 tonne hydraulic ram and pump unit are also easily removed for use on other pressing jobs outside your workshop such as straightening or bending. The press is supplied with a pressure gauge, two heavy duty pressing plates and is constructed from industrial grade C channel making it ideal for mechanics or the serious home workshop.Features
- Ideal for removing and installing - Bushing, Ball-joints, Bearings, Gears, Pulleys, etc
- Heavy duty construction with head,table and uprights all made from heavy C channel steel
- Hydraulics assembled in a temperature controlled clean room for maximum quality
- Hydraulics individually factory tested prior to shipping.
- Adjustable sliding head up to 395mm travel between the vertical post
- 20 tonne hydraulic ram and hand pump, easily removed for use on other pressing jobs
- Metric / imperial pressure gauge included
Includes
- Complete with bending plates
-
Overview
25 x 3mm Flat Bar CapacityBench MountFeatures
- Precision machined rolls
- Heat-treated and hardened rolls
- Groove machined into rolls for Ø5mm mild steel rod
- Knurled rolls for additional grip
MODEL RR-5G (Qty)Powered Driven Rolls 2 x Manual (Type)Bending Rolls Manual Bottom Right (mm)Flat Bar Capacity - MS (size / Ø) 25 x 3 / 125 (mm)Round Bar Solid Capacity - MS (size / Ø) Ø5 / 125 (mm)Dimensions (L x W x H) 360 x 190 x 180 (No / Yes*)Note: Requires Additional Tooling No (cm)Shipping Dimensions (L x W x H) 36 x 19 x 18 (kg)Nett Weight 6 -
3/8" - 7/8" Round, 3/4" & 1" Square CapacityOverview
This tube bending kit have everything that you need to make smooth bends. Simply mount the cast iron base onto your bench top or clamp it into a vice, and you are ready to bend 3/8, 1/2, 5/8, 9/16, 3/4, or 7/8 in. round, and 3/4 or 1 in. square tubing. This bending kit includes the base, extension handle, dies, and a storage case.Features
- Suitable for 1.2mm wall thickness in mild steel
- Includes round formers 3/8",1/2",9/16",5/8",3/4",7/8"
- Includes square formers 3/4" & 1"
-
Overview
For cold or hot bending of flat, round, and square steelFeatures
- COLD BENDING - Flat 100x5mm, Square 16x16mm, Round Ø18mm, Angle Steel 60x8mm (only with pre-notching)
- HOT BENDING - Flat 100x10mm, Square 20x20mm, Round Ø20mm, Angle Steel 100x10mm (only with pre-notching)
- Mount to work bench with 4 mounting holes for sturdy operation
- Adjustable bending stop with angle scale up to 120°
- Adjustable material length stop for repeatability
- Eccentric quick action cam lever material clamp
- Wide supporting face ensuring safe and reliable operation
- Bending angle of various radius by changing and/or turning around die plate
Includes
- Additional Bending Plates
-
1.2mm Mild Steel Capacity500mm throatOverview
The PPH-51 Planishing Hammer has been long used in metal fabrication and restoration to smooth large areas of metal after it has been roughly shaped with a hammer and sand bag. Common uses are for custom motorcycle gas tank and fender manufacturing, street rod bodies, patch panels for auto restoration, repair and metal sculpting. The power head is a heavy-duty aircraft rivet gun, sturdy steel fabricated frame with 500mm throat depth, is beefy enough to smooth 1.2mm mild steel. A quick release allows the lower shaft to slide down, to accept panels with deep flanges. The power head adjustment controls the intensity from 875-1350 blows per minute. A foot control starts and stops the hammering while being hooked up to compressed air. Includes Ø32mm flat top die, 25, 50 and 76mm radius anvils. The machine weigh's 25kg and has bolt holes to be easily secured to floor.Features
- 500mm throat capacity
- 1.2mm mild steel capacity
- Foot pedal operation
- Comes with 25, 50, 76mm radius anvils
- 875-1350 blows/minute
- 50 - 100PSI pressure
- 4cfm air consumption
- Overall height 1220mm
- The footprint of the machine is 750mm x 350mm
-
Price is ex-Adelaide(Please note this item requires a forklift to unload. Please contact us for freight costs)The MBR-1070XT motorised bead roller is much easier to use compared to manual machines to having your panels beaded in your home workshop or garage. Made from heavy plate steel and a now with a massive 1070mm throat depth making it perfect for strengthening any type of car roof, body panels, seals & guards etc. This bead roller is electrically gear driven via a forward & reverse foot control switch that drives both the bottom and top bead rolls. The drive shafts are supported in quality bronze bearing bushes and incorporate with thrust ball bearings for additional support & accuracy. The MBR-1070XT also includes a stand that also stores the twelve sets of the most common rolls required by any metal forming automotive enthusiasts or professional. 1.2mm mild steel capacity.MODEL MBR-1070XT (Type)Machine Bead Roller - Motrised (mm / Gauge)Mild Steel - Thickness Capacity 1.2 / 18 (mm / Gauge)Aluminium - Thickness Capacity 1.6 / 16 (mm)Throat Depth Maximum 1070 (mm)Roll Diameter 70 (rpm)Output Drive Speed 0 - 18 (kW / hp)Motor Power 0.25 / 0.33 (V / amp)Voltage / Amperage 240 / 10 (kg)Nett Weight 150 Includes
- 12 sets of hardened rolls (Ø20mm Bore):
- 5/32" (4mm) beading dies
- 1/4" (6.35mm) beading dies
- 3/8" (9.5mm) beading dies
- 15/32" (12mm) beading dies
- 19/32" (15mm) beading dies
- 1/16" (1.6mm) flanging dies
- 1/8" (3mm) flanging dies
- 1/4" (6.35mm) flanging dies
- 3/8" (9.5mm) flanging dies
- Ogee beading dies
- Wiring dies
- Shearing dies
-
#94 wire brush to suit EB-351DSA bandsaw. -
52mm Ø x 12mm brush. -
(Please note this item requires a forklift to unload. Please contact us for freight costs)
Features
- 3 Axis digital readout fitted
- 5HP 415V motor with mechanical variable speed system
- NT40 Spindle taper with a chrome & ground quill
- Digital speed readout display for accurate cutter speed
- Hardened & ground work table & slide-ways
- Square construction slides for Y & Z-Axis to maximise rigidity
- Powered elevating motor for Z-Axis
- Meehanite casting for high strength & minimal deformation
- Quality electrics & overload protection in an easy access enclosure
- Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
- The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
- High / neutral and low gear selection lever to maximise torque
- X & Y-Axis power-feed with adjustable micro switch feed stops
- Micro switch on the manual knee handle for additional operator safety
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Automatic quill feed 0.04, 0.08, 0.15mm/rev
- Automatic cut off depth stop on quill
- Oil lubrication pump and reservoir
- Slide-way covers Y & Z-Axis
- Mill head tilts to ±45º forward and back
- Mill head tilts to ±90º left and right
- Manual quick action quill lever
- Mechanical spindle brake
- Tool box and manual
Includes
- 3 Axis digital readout fitted
- Digital speed readout display
- Z-Axis powered elevating motor
- X & Y-Axis power-feeds
- One-shot oil lubrication pump and reservoir
- Machine vice (160mm)
- Clamp kit
- Drawbar M16 thread
- Coolant system
- Slideway covers
- Halogen light
- Safety cutter guard
- Swarf tray
MODEL BM-53VE Digital Readout 3-Axis Digital Readout Type Vertical (mm)Table Size 1370 x 254 Spindle Taper - Vertical NT40 (mm)Longitudinal Travel (X-Axis) 910 (mm)Cross Travel (Y-Axis) 400 (mm)Vertical Travel (Z-Axis) 415 Type of Slides Dovetail (X), Square (Y & Z) (mm)Ram Travel 555 (mm)Spindle to Table 465 (mm)Spindle Travel / Diameter 127 / 86 (mm)Throat Depth (max.) 635 Tilting Head (Left ~ Right) ±90º Tilting Head (Forward ~ Back) ±45º (mm/rev)Power Feed - Quill 0.04 / 0.08 / 0.15 (mm/min)Power Feed - Longitudinal (X-Axis) 20 - 2000 (mm/min)Power Feed - Cross (Y-Axis) 20 - 2000 (mm/min)Power Feed - Vertical (Z-Axis) Rapid (inch / mm)Table T-Slot Size 16 (kg)Work Table Load Capacity 350 (No./ rpm)Spindle Speeds Vertical Variable (50 - 3550) (kW / hp)Motor Power - Vertical Spindle 3.75 / 5 (V / amp)Voltage / Amperage 415 (kg)Nett Weight 1545