Overview
This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range.
Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, coolant system, X axis power feed unit, drill chuck, 1" & 1-1/4" horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
Extra Features:
Swivel table
1" & 1-1/4" horizontal arbors
Features
-
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- Swivel table left & right with graduated scale
- Mill head tilts to ±45º left to right
- 450mm horizontally sliding and rotating ram
- NT30 Horizontal and vertical spindles that are hardened and ground
- Precision-ground dovetail slide-ways and table
- Precision milling table incorporating machined T slots
- Rear concertina slide-way cover
- Forward and reverse button switch
- Fine hand wheel operated quill feed
- Swarf & splash tray
- Spindle lock for quill
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Vertical quill hand-wheel dial graduations @ 0.05mm
- All slides utilise dovetail construction for maximum rigidity
- Includes 1" & 1-1/4" arbors for the horizontal spindle
- * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
- * Note: Optional Y & Z power feeds require additional parts & fitting (not included)
Includes
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- LED work light
- Drill chuck & arbor
- NT30 to 3MT adaptor
- 2MT & 3MT adaptors
| MODEL | HM-54GV |
|---|---|
| Digital Readout | 3-Axis Digital Readout |
| Type | Vertical & Horizontal |
| (mm)Table Size | 1000 x 240 |
| Spindle Taper - Vertical | NT30 |
| Spindle Taper - Horizontal | NT30 |
| (mm)Longitudinal Travel (X-Axis) | 600* |
| (mm)Cross Travel (Y-Axis) | 200* |
| (mm)Vertical Travel (Z-Axis) | 340 |
| Type of Slides | Dovetail |
| (mm)Ram Travel | 450 |
| (mm)Spindle to Table | 375 |
| (mm)Spindle Travel / Diameter | 120 / 90 |
| (mm)Throat Depth (max.) | 640 |
| Tilting Head (Left ~ Right) | ±45º |
| Tilting Head (Forward ~ Back) | Fixed |
| (mm)Drilling Capacity | 40 |
| (mm)End Milling Capacity | 25 |
| (mm)Face Milling Capacity | 80 |
| (mm/rev)Power Feed - Quill | Manual |
| (mm/min)Power Feed - Longitudinal (X-Axis) | 20 - 2000 |
| (mm/min)Power Feed - Cross (Y-Axis) | Optional * |
| (mm/min)Power Feed - Vertical (Z-Axis) | Optional * |
| (inch / mm)Table T-Slot Size | 14 |
| (kg)Work Table Load Capacity | 160 |
| (No./ rpm)Spindle Speeds Vertical | Variable (100 - 2000) |
| (No./ rpm)Spindle Speeds Horizontal | 9 (60 - 1350) |
| (kW / hp)Motor Power - Vertical | 2.2 / 3 |
| (kW / hp)Motor Power - Horizontal | 1.5 / 2 |
| (V / amp)Voltage / Amperage | 240 / 10 |
| (cm)Shipping Dimensions (L x W x H) | 134 x 114 x 225 |
| (kg)Nett Weight | 900 |
