- 315mm blade
- 3HP 415V three phase motor
- 2 speed 20/40rpm slow speed for cutting stainless steel
- 80mm x 80mm (115mm x 70mm) @ 90°
- 70mm x 70mm @ 45°
- 90mm round (55mm solid) @ 90°
- 80mm round (50mm solid @ 45°
- Italian made quality
- Recirculating coolant system with electric pump – Creates instant flow of coolant – Flood applied coolant creates a cooler cut, for increased finish quality & blade life
- Swivel head 45° left & right
- Trigger switch operation
- Quick locking double vice for burr free cutting
- Incorporated recirculating mechanical coolant system supplying coolant to both sides of the blade
- Adjustable material stop for repetitive production
- Comes complete with blade
- Optional stand available – part# MC-STAND315
-
(Please note this item requires a forklift to unload. Please contact us for freight costs) -
(Please note this item requires a forklift to unload. Please contact us for freight costs)Features
- 3 Axis digital readout fitted
- 5HP 415V motor with mechanical variable speed system (50-3350rpm)
- NT40 Spindle taper with a 105mm chrome & ground quill
- Hardened ballscrew X & Y-Axis providing smooth and accurate operation
- 1370mm x 254mm table with 16mm T-slots
- Travels: 890mm longitudinal, 400mm cross, 400mm vertical
- Quill travel:127mm
- Ram travel: 550mm
- Spindle to table: 450mm
- Digital speed readout display for accurate cutter speed
- Hardened & ground work table & slide-ways
- Square construction slides for Y & Z-Axis to maximise rigidity
- Powered elevating motor for Z-Axis
- Meehanite casting for high strength & minimal deformation
- Quality electrics & overload protection in an easy access enclosure
- Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
- The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
- High / neutral and low gear selection lever to maximise torque
- X & Y-Axis power-feed with adjustable micro switch feed stops
- Micro switch on the manual knee handle for additional operator safety
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Automatic quill feed 0.04, 0.08, 0.15mm/rev
- Automatic cut off depth stop on quill
- Oil lubrication pump and reservoir
- Slide-way covers Y & Z-Axis
- Mill head tilts to ±45º forward and back
- Mill head tilts to ±90º left and right
- Manual quick action quill lever
- Mechanical spindle brake
- Tool box and manual
Includes
- 3 Axis digital readout fitted
- Hardened ballscrew X & Y-Axis
- Digital speed readout display
- One-shot oil lubrication pump and reservoir
- X & Y-Axis power-feed
- Z-Axis powered elevating motor
- Machine vice 160mm
- Clamp kit set
- Drawbar M16 thread
- Coolant system
- Slideway covers
- Safety cutter guard
- Halogen light
- Swarf tray
-
Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs)Overview
Floor standing, heavy duty metal turning lathe suitable for the keen model engineer and general maintenance work shops. Featuring a precision ground, induction hardened bed, fully gear driven spindle with a speed range of 65 - 1810rpm, selectable via the front of headstock mounted gear selection levers. 2HP single phase 240V motor is supplied on machine, taper roller spindle bearings, range of cross and longitudinal feed speeds selected on a separate gearbox, thread chasing dial, spindle foot brake, chuck guard with safety interlock, guarded leadscrew, splash guard, coolant pump system, work lamp, digital readout on a separate panel. Supplied with a large range of standard accessories including a 150mm(6") 3 jaw self centring chuck, 200mm(8") 4 jaw independent chuck, face plate and dead centres. 5 to 3 MT reduction sleeve, steady rest, follow rest, quick change tool post with 4 tool holders. The floor stand is supplied with a swarf tray and incorporates a foot brake. Change gears and toolbox with maintenance tools. The overall capacities are 900mm between centres and 300mm swing over the bed. A gap bed facility gives 450mm swing. Thread cutting facilities in Metric & Imperial with a reversible leadscrew, the thread chasing dial provides easy re-engagement of the leadscrew in the correct position. (note the thread chasing dial is designed for imperial only).Features
- 2 Axis digital readout
- Quick change toolpost with 4 holders
- Gear drive headstock for quick change of spindle speeds
- Precision 'V'-beds are hardened and ground, incorporating a rigid webbed casting
- Concertina leadscrew cover
- Slide out swarf tray from front of machine
- Low voltage work light
- Foot operated spindle brake with safety cut out switch
- Slide out front swarf tray for easy cleaning
- Change gears for metric and imperial thread cutting
- Oil sight glass for head stock and gearbox
- Adjustable taper roller bearings support the spindle
- 18 spindle speeds from 65 to 1810rpm
- Inching button is incorporated on the control panel for convenient spindle speed selection
- Enclosed quick action gearbox for thread cutting and auto feeding
- Powered longitudinal and cross feeds
- D1-4 camlock spindle for quick chuck changes and safe reverse direction turning. ISO standard
- Removable gap bed-way for larger diameter jobs
- Dual calibrated dials (except for saddle hand-wheel)
- Chuck & change gear guards are fitted with micro switches
Specifications
- 300mm swing over bed
- 900mm between centres
- 38mm spindle bore
- 450mm swing in gap
- 180mm swing over cross slide
- 170mm cross slide travel
- 75mm compound slide travel
- Imperial cross feed: 0.009-0.236inch/rev
- Imperial longitudinal feed: 0.04-1.2236inch/rev
- 150mm centre height
- Tool height suits 12mm tools
- 5MT headstock
- 3MT tailstock
- Imperial leadscrew
- Metric thread steps and pitch: 32 (0.4-7)
- Imperial thread steps and TPI: 36 (4-60)
- Spindle speeds: 18 (65-1810)
- 2HP 240V motor
Includes
- 2 Axis digital readout system
- Concertina leadscrew cover
- Quick change toolpost with 4 holders
- Slide out front swarf tray
- 3-jaw chuck with reverse jaws
- 4-jaw chuck
- Face plate
- Fixed steady
- Travelling steady
- Coolant system
- Change gears
- Dead centres
- Thread-chasing dial
- Safety chuck guard
- Work light
- Stand
- Foot brake
- Rear splash guard & slide out swarf tray
- Tool box
- Instruction booklet
-
Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs)Specifications:410mm swing over bed1000mm between centres52mm Spindle Bore225mm swing over cross slide580mm swing in gap210mm cross slide travel140mm compound slide travelMetric cross feed: 0.025-0.85mm/revMetric longitudinal feed: 0.05-1.7mm/rev205mm centre heightTool height suits 20mm tools6MT headstock4MT tailstockMetric leadscrewMetric thread steps and pitch: 39 (0.2-14)Imperial thread steps and TPI: 45 (2-72)Spindle speeds: 16 (45-1800)4.5HP 415V motorIncludes Digital Readout & Quick Change ToolpostFeatures
- 2 axis digital readout system
- Quick change toolpost
- Triple bearings supporting headstock spindle
- Adjustable taper roller bearings providing spindle accuracy
- Precision 'V'-beds & headstock gears are all hardened & ground
- One piece cast iron base increases rigidity
- Overload protection on drive motor and coolant system
- Universal enclosed gearbox incorporating metric & imperial thread capabilities
- Inching button incorporated on the control panel for convenient spindle speed selection
- Foot operated spindle brake with safety cut out switch
- 250mm wide induction hardened heavy duty cast iron bed
- Removable gap bed allowing work piece to swing up to 580mm
- Chuck guard fitted with safety micro switch
- Powered longitudinal and cross feeds
- Adjustable 6 position length-stop on bed-way for accurate repetitive operation
- Dual calibrated dials incorporating metric & imperial graduations
- Coolant system with flexible hose enabling operator to manipulate flow direction
- Oil sight glass for head stock and gearbox
- Low voltage halogen work light
- Lubrication pump on saddle oiling slides
- D1-6 camlock spindle for quick chuck removal
- Large 52mm spindle bore
- 2 speed, 4.5hp, 415V motor
Includes
- 2 Axis digital readout system
- Quick change toolpost
- Concertina leadscrew covers
- 200mm 3-jaw chuck with reverse jaws
- 250mm 4-jaw chuck
- Face plate
- Fixed steady with roller bearings
- Travelling steady with roller bearings
- Dead centres
- Thread chasing dial
- Foot brake
- Coolant system
- Work light
- Rear splash guard
- Spindle reducing bush
-
Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs)Specifications:356mm swing over bed1000mm between centres40mm Spindle Bore225mm swing over cross slide175mm cross slide travel100mm compound slide travelImperial cross feed: 0.0008-0.15 inch/revImperial longitudinal feed: 0.0016-0.30 inch/rev178mm centre heightTool height suits 16mm tools5MT headstock3MT tailstockImperial leadscrewMetric thread steps and pitch: 30 (0.4-7.0)Imperial thread steps and TPI: 32 (4-56)Spindle speeds: 9 (82-2000rpm)2HP 240V motorIncludes Digital ReadoutOverview
Manufactured in Taiwan Tool room quality precision lathe and have been sold for over 20 yearsFeatures
- 2 Axis digital readout system
- Gear drive headstock for quick change of spindle speeds
- Stand increasing rigidity and reducing vibration
- Precision 'V'-beds are hardened and ground, incorporating a rigid webbed casting
- Foot operated spindle brake with safety cut out switch
- Slide out front swarf tray for easy cleaning
- Change gears for metric and imperial thread cutting
- Oil sight glass for head stock and gearbox
- Adjustable taper roller bearings support the spindle
- Overload clutch mechanism on auto power feed
- Overload protection on drive motor and coolant system
- 2hp 240V motor, 9-speed (82 - 2000rpm)
- Inching button is incorporated on the control panel for convenient spindle speed selection
- Enclosed quick action gearbox for thread cutting and auto feeding
- Powered longitudinal and cross feeds
- D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
- Removable gap bed-way for larger diameter jobs
- Dual calibrated dials (except for saddle hand wheel)
- Coolant system with flexible hose
- Slide out swarf tray
Includes
- 2 Axis digital readout system
- Concertina leadscrew cover
- Slide out front swarf tray
- 160mm 3-jaw chuck with reverse jaws
- 200mm 4-jaw chuck
- Face plate
- Fixed steady
- Travelling steady
- Change gears
- Dead centres
- Thread-chasing dial
- Safety chuck guard
- Stand
- Foot brake
- Rear splash guard & swarf tray
- Tool box
- Instruction booklet
-
(Please note this item requires a forklift to unload. Please contact us for freight costs)Overview
Manufactured in TaiwanAll capacities in Mild Steel BAR SHEARSolid bar shear: 25mm roundAdjustable hold-down for cleaner cut Single multi-hole hold-down Optional equipment for cropping channel, tee and I-beam sectionsANGLE SHEARAngle shear @ 90º: 80 x 80 x 8mmAngle Shear @ 45º: 50 x 50 x 6mmSafety guarding around hold-down Easily adjustable hold-down Four cutting edges to all blades Mitre cut at 45ºFLAT BAR SHEARFlat bar shear: 350 x 8mm, 180 x 12mm Easily adjustable hold-down Good visibility to blade line Table support with guides Angle flange trim/mitre to 45º Shaped blade to give minimum distortionFeatures
-
- Round punching capacity up to 40 x 8mm, 22 x 15mm
- Power inching for easy job set up
- Adjustable stroke for faster punching
- Punch table and shear table both fitted with guides as standard
- All work stations guarded
- Most cutting blades are four-sided for long life
- Adjustable length stop with rule
- Four work stations
- Fully-filtered hydraulic system
- Telemecanique electrical components
- Pre-Commissioning:
- 1. Punch & Shear is run & tested prior delivery
- 2. Hydraulic oil is included with machine
Includes
- 6 sets of round punches & dies:
- Punches: 20, 22, 24, 26, 28 & 30mmm
- Dies: 20.7, 23.2, 25.2, 27.2, 29.2 & 31.2mmm
- Full safety guarding at all workstations
- 1 metre length stop for shear/crop stations
- Tooling to all workstations
- Punch, Shear & Notch support tables
-
-
Sale!
1.6mm Mild Steel CapacityOverview
The SHST-1.6HD is unique that its head has a deep throat of 205mm, this foot operated shrinker stretcher is ideal for mild steel sheet metal up to 16-gauge, 1.6mm in thickness. This is the perfect machine for working metal for auto, cycle or aeroplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity. Our metal shrinker stretcher has a rugged floor stand with foot pedal control to actuate the jaws allowing the hands to be free to properly work the material.Features
-
- 1.6mm mild steel capacity
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 205mm wide
- Easy foot pedal operation
- Strong steel stand provides an ideal working height
Includes
- 1 x set of shrinking dies
- 1 x set of stretching dies
-
-
Sale!
1.2mm Mild Steel CapacityOverview
The SHST-1.2H hand lever operated shrinker & stretcher for shrinking or stretching mild steel sheet metal up to 18-gauge, 1.2mm in thickness and can be bench mounted or attached to the optional stand (S2263). This is the perfect machine for working metal for auto, cycle or aeroplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity.Features
-
- Ideal for repair work around wheel openings, door jams, windshields and trunk gutters
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 25.4mm wide
- 1.2mm mild steel capacity
- 1.6mm aluminium capacity
- 0.9mm stainless steel capacity
- Curves to a 76mm radius
- Totally portable
- Mounting holes in base
- Can be held in vice
- Toughened arms and pivot pins
- Change from stretcher to shrinker in seconds
Includes
- 1 x set of shrinking dies
- 1 x set of stretching dies
-
-
Price is ex-Adelaide(Please note this item requires a forklift to unload. Please contact us for freight costs)1.6mm Mild Steel CapacitySwivel roller head 0 - 90º , 890mm Throat DepthOverview
The EWM-89 English wheel is designed to allow craftsmen to form smooth curves from flat sheets of metal. They are mainly used in car, motorcycle, aviation and racing car construction or restoration where sheet metal panels need to have compound curves formed. The operator passes the sheet metal between the anvil wheel and the rolling wheel. This process stretches the material and causes it to become thinner. As the material stretches, it forms a convex surface over the anvil wheel. This heavy duty steel fabricated machine has a large 914mm throat which allows a capacity of 1.6mm for mild steel and 2mm for Copper and Aluminium. Supplied with a 152mm diameter x 57mm wide top rolling wheel and 60, 83, 127, 216, 305mm radius dies & 1 x flat die. The machine weighs 101kg and has provisions to be easily secured to floor.Features
- 914mm throat capacity
- 1.6mm mild steel capacity
- 2.0mm copper & Aluminium capacity
- Swivel roller head 0 - 90º
- Top anvil Ø152 x 57mm
- Includes 60, 83, 127, 216, 305mm radius dies & 1 x flat die
- Sealed ball bearings in all dies and heat treated to minimise wear
-
Sale!
1.2mm Mild Steel Capacity500mm throatOverview
The PPH-51 Planishing Hammer has been long used in metal fabrication and restoration to smooth large areas of metal after it has been roughly shaped with a hammer and sand bag. Common uses are for custom motorcycle gas tank and fender manufacturing, street rod bodies, patch panels for auto restoration, repair and metal sculpting. The power head is a heavy-duty aircraft rivet gun, sturdy steel fabricated frame with 500mm throat depth, is beefy enough to smooth 1.2mm mild steel. A quick release allows the lower shaft to slide down, to accept panels with deep flanges. The power head adjustment controls the intensity from 875-1350 blows per minute. A foot control starts and stops the hammering while being hooked up to compressed air. Includes Ø32mm flat top die, 25, 50 and 76mm radius anvils. The machine weigh's 25kg and has bolt holes to be easily secured to floor.Features
- 500mm throat capacity
- 1.2mm mild steel capacity
- Foot pedal operation
- Comes with 25, 50, 76mm radius anvils
- 875-1350 blows/minute
- 50 - 100PSI pressure
- 4cfm air consumption
- Overall height 1220mm
- The footprint of the machine is 750mm x 350mm
-
Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs)320 swing over bed600mm between centres38mm spindle bore210mm swing over cross slide150mm cross slide travel100mm compound slide travelMetric cross feed: 0.022-0.15 mm/revMetric longitudinal feed: 0.1-1.4 mm/rev160mm centre heightTool height suits 12mm tools5MT headstock3MT tailstockMetric leadscrewMetric thread steps and pitch: 11 (0.5-4.0)Imperial thread steps and TPI: 27 (9-48)Spindle speeds: 12 (60-1600rpm)1HP 240V motorFeatures
- Geared headstock for quick change of spindle speeds
- Hardened and ground bed
- Adjustable taper roller spindle bearings
- Metric & imperial thread cutting
- Powered longitudinal and cross feed
- Head stock oil sight glass
- Thread chasing dial
- Quick action tailstock locking lever
- Forward/reverse spindle switch
Includes
- 160mm 3-jaw chuck with reverse jaws
- 200mm 4-jaw chuck
- Face plate
- Fixed steady
- Travelling steady
- Change gears
- Dead centre
- Rear splash guard & swarf tray
- Spanners
- Tool box
- Safety chuck guard
- Instruction booklet
Optional Accessories
- Lathe stand to suit (L142)
-
Features
- Steel lathe stand
- Left and right hand cabinets
- Suits AL-320G bench lathe