- 72 x LED 5700K light provides daylight effect
- Dimmer control 10% -100%
- 2.25x clear magnification lens on centre of light head
- 800mm long arm permits the light to reach a large area
- 1.9 metre cord, 240V 10amp
- 230mm diameter light head
- Repositioning handle mounted to light
- 4 off, 6mm mounting hole at 45mm centres
- 37.5mm square aluminium tube mounted to base
- 25 x 16mm rectangular tube extension
- On/off switch mounted to lower arm near base
-
-
Toolmaster R8-MT3 Morse Taper Adaptor 7/16" UNF Drawbar Thread Precision ground and hardened. Morse taper adaptors are used to adapt a Morse taper tool or cutter to a spindle taper -
- Precision ground with 1/2" Whitworth drawbar thread
- For using drill chucks in drill mill machines
-
Out of stock
Solid design, main body made of FC15, with heat treated black oxide finished steel jaws HRC 45-50. Front fixed prismatic jaw with cross V-grooves designed for clamping work piece firmly in both vertical and horizontal positions. A: 84mm, B:31mm, C:100mm (opening), D28.5mm, E:220mm, E1:343mm, F:13mm, G:78mm, H:63mm, I:102mm, J:200mm, L8mm, M36mm, Weight:5.7kg -
Overview
Sino MK series DRO scales offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Scales lengths available in a range from 170mm to 1020mm. Compact scales available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- Scale body made from extruded aluminium with wiper seals
- Glass scale with 5µm resolution
- 3m connection cable with 9 pin D-Sub connector
- The slide carrier of the MK series scales uses Japanese NSK bearings to provide high precision, low noise and long service life
- Includes cover & mounting screws
- An easy-to-follow D.I.Y. Installation Manual is supplied with each system, complete with illustrations and mounting brackets
Optional Accessories
- Mounting backing plate to suit (D5251) available for ease of installation on non-machined surfaces
-
Overview
Sino MK series DRO scales offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Scales lengths available in a range from 170mm to 1020mm. Compact scales available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- Scale body made from extruded aluminium with wiper seals
- Glass scale with 5µm resolution
- 3m connection cable with 9 pin D-Sub connector
- The slide carrier of the MK series scales uses Japanese NSK bearings to provide high precision, low noise and long service life
- Includes mounting backing plate, cover & mounting screws
- An easy-to-follow D.I.Y. Installation Manual is supplied with each system, complete with illustrations and mounting brackets
-
Out of stock
Overview
Sino XH series DRO Counters offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Together with the MK series scales and mounting bracket kits sold separately let the Sino XH series digitalise your lathe or mill experience. Standard series scales available ranging from 220mm to 1020mm and Compact series available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- 2-Axis digital display
- Multifunction display for lathes or milling machines
- Inch / metric display
- Mid point calculation
- Absolute & incremental (ABS/INC)
- Pre-set datum coordinates
- Bolt hole circle and line positioning
- Arc and slope processing
- Angle display mode
- Load default setup
- Clear zero
- Power off memory
- Brightness adjustment
- 5µm accuracy
- 240V
-
250mmD1-6 Camlock MountOverview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
- Outside jaws
- Inside jaws
- Mounting screws
- Chuck key
ORDER CODE C263 (mm)Chuck Size Ø250 Camlock D1-6 (mm)Outside Jaw 6 - 110 (mm)Inside Jaw 90 - 250 (rpm)Speed 2400 (mm)D1 106.3 (mm)D2 226 (mm)D3 80 (mm)H 120 (mm)H1 80 (mm)h 5 (kg)Nett Weight 26 -
200mmD1-4 Camlock MountOverview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
- Outside jaws
- Inside jaws
- Mounting screws
- Chuck key
ORDER CODE C262 (mm)Chuck Size Ø200 Camlock D1-4 (mm)Outside Jaw 4 - 85 (mm)Inside Jaw 65 - 200 (rpm)Speed 3000 (mm)D1 63.52 (mm)D2 180 (mm)D3 50 (mm)H 109 (mm)H1 75 (mm)h 5 (kg)Nett Weight 18 -
160mmD1-4 Camlock MountOverview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
- Outside jaws
- Inside jaws
- Mounting screws
- Chuck key
ORDER CODE C260 (mm)Chuck Size Ø160 Camlock D1-4 (mm)Outside Jaw 3 - 55 (mm)Inside Jaw 55 - 145 (rpm)Speed 3600 (mm)D1 130 (mm)D2 142 (mm)D3 40 (mm)H 95 (mm)H1 65 (mm)h 5 (kg)Nett Weight 10 -
150 - 170mm Lathe Centre HeightOverview
Manufactured in Taiwan Manufactured from carbonized and hardened steel. Italian design style.Features
- All bearing surfaces are precision ground to ensure rigidity
- Handy lathe accessory for tool rooms and general engineering shops
- Ease of operation cuts set-up time by 90%
- No shims are required to adjust tools to correct centre height
- Easily fitted to most centre lathes
- Please Note: Some machining required to suit your lathe
Includes
- 3 x Square Tool Holders - for 16mm tools
- 1 x Vee Tool Holders - for boring bars
MODEL QA-150 (mm)Lathe Centre Height 150 - 170 (mm)Lathe Swing 300 - 340 (mm)A 15 (mm)B 20 (mm)C 60 (mm)D 74 (mm)H 28 - 41 (mm)h 60 (mm)S 24 (mm)T 16 (No.)Number of Sides 2 (No.)Number of Holders 4 (kg)Nett Weight 6.2 -
Vertex coolant pump 1/4Hp, 415V 3 phase 2 pole. 50/60 cycle, 0.6 amp. 180mm leg. CE certified, high grade materials with anti rust treatment. A: 158 +/-0.2, B: 125mm, C: Ø122mm, D: Ø180mm, G: Ø8mm, H: 180mm, Y: 19mm L: 180mm. Out diameter: PT 1/2″. Capacity at 1 M/min: 74l-76l. Capacity at 2M/min: 71l-72l.