-
52mm Ø x 12mm brush. -
#94 wire brush to suit EB-351DSA bandsaw. -
Features
- "NO BULL CAPACITY" - Australian Tested & Rated To True Working Capacity
- Heavy duty cast iron
- 0.7mm mild steel capacity
- 175mm throat
- 50mm shaft to centre
- Mild steel capacity is rated on hot rolled material with 250MPA
Includes
- 5 sets of rolls, wiring, crimping, edge beading, single bead & elbow edging
MODEL SJ-22 (Type)Machine Swage & Jenny (mm / Gauge)Mild Steel - Thickness Capacity 0.7 / 22 (mm)Throat Depth Maximum 175 (mm)Roll Diameter 55 (cm)Shipping Dimensions (L x W x H) 45 x 38 x 19 (kg)Nett Weight 28 -
1 TonneFeatures
- Heavy-duty construction
- Cast iron frame
- Four-position anvil
- Square ram
-
1.2mm Mild Steel CapacityOverview
The SHST-1.2H hand lever operated shrinker & stretcher for shrinking or stretching mild steel sheet metal up to 18-gauge, 1.2mm in thickness and can be bench mounted or attached to the optional stand (S2263). This is the perfect machine for working metal for auto, cycle or aeroplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity.Features
-
- Ideal for repair work around wheel openings, door jams, windshields and trunk gutters
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 25.4mm wide
- 1.2mm mild steel capacity
- 1.6mm aluminium capacity
- 0.9mm stainless steel capacity
- Curves to a 76mm radius
- Totally portable
- Mounting holes in base
- Can be held in vice
- Toughened arms and pivot pins
- Change from stretcher to shrinker in seconds
Includes
- 1 x set of shrinking dies
- 1 x set of stretching dies
-
-
(Please note this item requires a forklift to unload. Please contact us for freight costs)Overview
The Metalmaster SJ-24D Bead Roller is perfect for the automotive enthusiast starting out in repairing or reproducing car panels, or for anyone wanting to strengthen automotive body panels, roofs, seals or even guards. Constructed from heavy-duty plate steel, the SJ-24D Bead Roller can handle up to 1.2mm mild steel sheet metal at a generous 460mm throat depth. This bead roller is manually gear driven by a hand crank that drives both the bottom and top bead rolls simultaneously. The 25mm drive-shafts are supported in quality bronze bearing bushes that incorporates greasing nipples to ensure smooth rolling operation. The SJ-24D also includes 7 sets of the most commonly used rollers required by any metal forming automotive enthusiast or professional - 1/4", 3/8", 1/2" bead rolls, 1/2", 1/16", 1/8" flange rolls and a shearing roll set.Features
- 1.2mm mild steel capacity for bead & flange rolls
- 1.0mm mild steel capacity for shearing rolls
- Heavy duty steel construction
- Strengthened frame with 16mm steel
- Strengthened stand with 88mm steel pipe
- Ø25mm drive shafts
- Ø22mm spigot for mounting rollers
- Ø54mm bead rollers
- Gear driven system
Includes
- 7 Sets of rolls with Ø22mm bore:
- 1/4" (6.35mm) single bead roll set
- 3/8" (9.5mm) single bead roll set
- 1/2" (12.7mm) single bead roll set
- 1/16" (1.6mm) flange roll set
- 1/8" (3.2mm) flange roll set
- 1/4" (6.35mm) flange roll set
- Shearing roll set
-
Price is ex-Adelaide
(Please note this item requires a forklift to unload. Please contact us for freight costs)
Overview
The MBR-610 motorised bead roller is much easier to use compared to manual machines to having your panels beaded in your home workshop or garage. Made from heavy plate steel and a massive 610mm throat depth making it perfect for strengthening any type of car roof, body panels, seals & guards etc. This bead roller is electrically gear driven via a forward & reverse foot control switch that drives both the bottom and top bead rolls. The drive shafts are supported in quality bronze bearing bushes and incorporate with thrust ball bearings for additional support & accuracy. The MBR-610 also includes a stand that also stores the twelve sets of the most common rolls required by any metal forming automotive enthusiasts or professional.Features
- 1.2mm mild steel capacity with 610mm throat
- Variable speed dial for superior control on all applications
- Forward / reverse foot pedal switches with emergency stop
- Ø70mm hardened & keyed rollers for positive drive
- 105mm gap height between roller support arms
- Allows clearance of up to 80mm on 90º return bends
- Heavy duty steel plate construction for increased rigidity
- Top & bottom roller shafts are geared & electrically driven
- Adjustable top roller with 38mm of vertical travel
- Top shaft adjusts horizontally to easily & accurately align dies
- Ø25mm drive shafts with grease-able bronze bushes, Ø20mm spigot for mounting rollers
- Adjustable material depth guide
- 0.25kW / 0.33hp, 240V variable speed motor with reduction gearbox
- Fitted with two rear wheels to allow easy mobility
- Includes a comprehensive range of rolls supplied as standard
Includes
- 12 sets of hardened rolls (Ø20mm Bore):
- 5/32" (4mm) beading dies
- 1/4" (6.35mm) beading dies
- 3/8" (9.5mm) beading dies
- 15/32" (12mm) beading dies
- 19/32" (15mm) beading dies
- 1/16" (1.6mm) flanging dies
- 1/8" (3mm) flanging dies
- 1/4" (6.35mm) flanging dies
- 3/8" (9.5mm) flanging dies
- Ogee beading dies
- Wiring dies
- Shearing dies
-
Price is ex-Adelaide(Please note this item requires a forklift to unload. Please contact us for freight costs)The MBR-1070XT motorised bead roller is much easier to use compared to manual machines to having your panels beaded in your home workshop or garage. Made from heavy plate steel and a now with a massive 1070mm throat depth making it perfect for strengthening any type of car roof, body panels, seals & guards etc. This bead roller is electrically gear driven via a forward & reverse foot control switch that drives both the bottom and top bead rolls. The drive shafts are supported in quality bronze bearing bushes and incorporate with thrust ball bearings for additional support & accuracy. The MBR-1070XT also includes a stand that also stores the twelve sets of the most common rolls required by any metal forming automotive enthusiasts or professional. 1.2mm mild steel capacity.MODEL MBR-1070XT (Type)Machine Bead Roller - Motrised (mm / Gauge)Mild Steel - Thickness Capacity 1.2 / 18 (mm / Gauge)Aluminium - Thickness Capacity 1.6 / 16 (mm)Throat Depth Maximum 1070 (mm)Roll Diameter 70 (rpm)Output Drive Speed 0 - 18 (kW / hp)Motor Power 0.25 / 0.33 (V / amp)Voltage / Amperage 240 / 10 (kg)Nett Weight 150 Includes
- 12 sets of hardened rolls (Ø20mm Bore):
- 5/32" (4mm) beading dies
- 1/4" (6.35mm) beading dies
- 3/8" (9.5mm) beading dies
- 15/32" (12mm) beading dies
- 19/32" (15mm) beading dies
- 1/16" (1.6mm) flanging dies
- 1/8" (3mm) flanging dies
- 1/4" (6.35mm) flanging dies
- 3/8" (9.5mm) flanging dies
- Ogee beading dies
- Wiring dies
- Shearing dies
-
1.2mm Mild Steel Capacity500mm throatOverview
The PPH-51 Planishing Hammer has been long used in metal fabrication and restoration to smooth large areas of metal after it has been roughly shaped with a hammer and sand bag. Common uses are for custom motorcycle gas tank and fender manufacturing, street rod bodies, patch panels for auto restoration, repair and metal sculpting. The power head is a heavy-duty aircraft rivet gun, sturdy steel fabricated frame with 500mm throat depth, is beefy enough to smooth 1.2mm mild steel. A quick release allows the lower shaft to slide down, to accept panels with deep flanges. The power head adjustment controls the intensity from 875-1350 blows per minute. A foot control starts and stops the hammering while being hooked up to compressed air. Includes Ø32mm flat top die, 25, 50 and 76mm radius anvils. The machine weigh's 25kg and has bolt holes to be easily secured to floor.Features
- 500mm throat capacity
- 1.2mm mild steel capacity
- Foot pedal operation
- Comes with 25, 50, 76mm radius anvils
- 875-1350 blows/minute
- 50 - 100PSI pressure
- 4cfm air consumption
- Overall height 1220mm
- The footprint of the machine is 750mm x 350mm
-
Price is ex-Adelaide(Please note this item requires a forklift to unload. Please contact us for freight costs)1.6mm Mild Steel CapacitySwivel roller head 0 - 90º , 890mm Throat DepthOverview
The EWM-89 English wheel is designed to allow craftsmen to form smooth curves from flat sheets of metal. They are mainly used in car, motorcycle, aviation and racing car construction or restoration where sheet metal panels need to have compound curves formed. The operator passes the sheet metal between the anvil wheel and the rolling wheel. This process stretches the material and causes it to become thinner. As the material stretches, it forms a convex surface over the anvil wheel. This heavy duty steel fabricated machine has a large 914mm throat which allows a capacity of 1.6mm for mild steel and 2mm for Copper and Aluminium. Supplied with a 152mm diameter x 57mm wide top rolling wheel and 60, 83, 127, 216, 305mm radius dies & 1 x flat die. The machine weighs 101kg and has provisions to be easily secured to floor.Features
- 914mm throat capacity
- 1.6mm mild steel capacity
- 2.0mm copper & Aluminium capacity
- Swivel roller head 0 - 90º
- Top anvil Ø152 x 57mm
- Includes 60, 83, 127, 216, 305mm radius dies & 1 x flat die
- Sealed ball bearings in all dies and heat treated to minimise wear
-
1.6mm Mild Steel CapacityOverview
The SHST-1.6HD is unique that its head has a deep throat of 205mm, this foot operated shrinker stretcher is ideal for mild steel sheet metal up to 16-gauge, 1.6mm in thickness. This is the perfect machine for working metal for auto, cycle or aeroplane body work. This machine is ruggedly built and can shrink or stretch metal with ease at full capacity. Our metal shrinker stretcher has a rugged floor stand with foot pedal control to actuate the jaws allowing the hands to be free to properly work the material.Features
-
- 1.6mm mild steel capacity
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 205mm wide
- Easy foot pedal operation
- Strong steel stand provides an ideal working height
Includes
- 1 x set of shrinking dies
- 1 x set of stretching dies
-
-
(Please note this item requires a forklift to unload. Please contact us for freight costs)Overview
10 tonne WORKSHOP HYDRAULIC PRESS - BENCH TYPE Suited to any workshop or garage for general use.Features
- Ideal for removing and installing - Bushing, Ball-joints, Bearings, Gears, Pulleys, etc
- Adjustable horizontal ram position
- High strength steel construction
- Pump can me mounted left or right side of frame
- Hydraulic operation
- H Frame style
- Spring return ram
Includes
- Complete with bending plates