- These levels have ground and graduated main vials
- Cross test vial
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- These vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
- Length (in): 12"
- Now comes in protective aluminium case
-
-
Sale!8 piece ratcheting combination spanner set. Combined ring/open ended spanners with 12 point ring ratchet. Same size at both ends. Chrome vanadium. Satin finish. Ratchet spanners 5/16?, 3/8?, 7/16?, 1/2?, 9/16?, 5/8?, 11/16?, 3/4?.
-
Sale!
- With locking device, can be released
- With replaceable tips made of tempered steel
- Black powder-coated
- DIN 5254 A; straight tips
- Pliers body: rolled steel, high-strength
- Tips: special tool steel, oil-hardened
- Length: 560mm
- Size of shaft: Ø122-300mm
- Tip size: Ø3.5mm
-
Sale!
- With locking device, can be released
- With replaceable tips made of tempered steel
- Black powder-coated
- DIN 5254 B; 90° angled tips
- Pliers body: rolled steel, high-strength
- Tips: special tool steel, oil-hardened
- Length: 570mm
- Size of shaft: Ø122-300mm
- Tip size: Ø3.5mm
-
Sale!Tungsten tap and die set in metal case contains: UNC Taps (2 each): #4x40, #6x32, #8x32, #10x24, #12x24, 1/4"x20, 5/16"x18, 3/8"x16, 7/16"x14, 1/2"x13, 9/16"x12, 5/8"x11, 3/4"x10 UNF Taps (2 each): #10x32, 1/4"x28, 5/16"x24, 3/8"x24, 7/16"x20, 1/2"x20, 9/16x18, 5/8"x18, 3/4"x16 UNS Taps (2 each): 1/4"x24, 1/4"x32 Metric Taps (2 each): M6x1.0, M8x1.25, M10x1.5, M10x1.0, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5 35 corresponding dies 2 adjustable tap holders 1 T-handle tap holder 2 die holders
-
Sale!This item is not available for sale online. Not for sale to the general public. Can only be purchased by ABN holding trade customers via official company purchase order.
- Range: 50.8mm/2"
- Resolution: 0.001mm/0.00005"
- Button functions: on/off, inch/mm, zero, data preset, change measuring direction, absolute/incremental measurement
- Keep preset data in memory after restart
- Data output
- Spindle lifting knob included
- Comes standard with flat back, optional lug backs are available (see SKU: 7330-L5)
- CR2032 battery: Button batteries pose a serious threat to young children. Keep out of reach of children. See warning label.
-
Sale!200mmD1-4 Camlock Mount
Overview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
-
Sale!Vertex 4" Anglock Milling Vice. 106mm jaws. 36mm jaw height. 103mm opening. Semishphere in moving jaw thrusts moveable jaw downward on horizontal force creating the angle lock feature. Leadscrew and sliding surface hardened and ground. Swivel base. Max. clamping force 1500kgf. A:106mm, B:36mm, C (Max):103mm, D:90mm, E:324mm, E1:351mm, F:13mm, G:211mm, H:96mm, I:126mm, J:242mm, K:228mm, L:14.5mm, M:75mm, N:16mm, P:15mm.
-
Sale!250mm x 125mm120 (N/cm2) Magnetic Force
Features
- Cam-operated On/Off handle to hold and release the work-piece
- Powerful permanent magnets
- Thick top and base plate for maximum rigidity
- The fine pitched magnetic poles make it suitable for small and thin pieces.
- Includes rear keeper plate
Dimensions (L x W x H) 250 x 125 x 48 (N/cm2)Magnetic Force 120 (mm)P 1 + 3 (mm)L 250 (mm)B 125 (mm)H 48 (mm)T 20 (kg)Nett Weight 14 -
Sale!Include 3MT & 4MT ArboursM5 - M12
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
- Clutch Torque Setting:
- 1 - 5 Nm
- 2 - 20 Nm
- 3 - 50 Nm
- 4 - 75 Nm
Includes
- MT3 & MT4 x JT6 arbors
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
Arbor Mount JT6 (MT)Taper 3 & 4 (mm)Tapping Range 5 - 12 (mm)Tapping Shank Size 3.5 - 10 (mm)D 75 (mm)D1 28 (mm)L 150 (mm)L1 105 (mm)A 45 (mm)B 12 (kg)Nett Weight 4.2 -