- Intermediate taps M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75
- 1" OD Button Dies: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75
- Tap wrench #1.5 bar type
- 1" OD button die holder
- Thread pitch gauge
-
Sale!Set contains:
-
Sale!
- Saber S1 Tap and Die Set - Metric & SAE
- Tungsten steel taps and dies.
- Clean and repair existing threads.
- 48 intermediate lead taps and 48 button dies.
- 4Gx40, 5Gx40, 6Gx32, 8Gx32, 10Gx24, 10Gx32, 12Gx24, 1/4"x20, 1/4"x28, 5/16"x18, 5/16"x24, 3/8"x16, 3/8"x24, 7/16"x14, 7/16"x20, 1/2"x13, 1/2"x20, 9/16"x12, 9/16"x18, 5/8"x11, 5/8"x18, 3/4"x10, 3/4"x16.
- 2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.25, 10x1.5, 11x1.5, 12x1.75, 12x1.25, 14x2.0, 14x1.5, 16x2.0, 16x1.5, 18x2.5, 18x1.5.
- NPT1/8"x27, NPT1/4"x18, BSP1/8"x28, BSP1/4"x19.
- 5 HSS Twist DRILLS 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm.
- 5 X Screw Extractors #1, #2, #3, #4, #5.
- 2 X Screw Pitch Gauges. 2 X Die Holders. 3 X Tap Wrenches. 1 X Screwdriver.
- 1 X Centre Punch.
-
Sale!
- Saber S2 Tap and Die Set - Metric, UNC/UNF + 1/8" NPT
- Tungsten steel taps and dies.
- 27 intermediate lead taps and 27 button dies.
- 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
- 4Gx40, 6Gx32, 8Gx32, 10Gx24, 10Gx32, 12Gx24, 1/4"x20, 1/4"x28, 5/16"x18, 5/16"x24, 3/8"x16, 3/8"x24, 7/16"x14, 7/16"x20, 1/2"x13, 1/2"x20.
- NPT1/8"x27.
- 2 X Screw Pitch Gauges.
- 1 X Die Holder.
- 2 X Tap Wrenches.
- 1 X Screwdriver.
-
Sale!
- Saber S3 Tap and Die Set - UNC/UNF + 1/8" NPT
- Tungsten steel taps and dies.
- 17 intermediate lead taps and 17 button dies.
- 4Gx40, 6Gx32, 8Gx32, 10Gx24, 10Gx32, 12Gx24, 1/4"x20, 1/4"x28, 5/16"x18, 5/16"x24, 3/8"x16, 3/8"x24, 7/16"x14, 7/16"x20, 1/2"x13, 1/2"x20.
- NPT1/8"x27.
- 1 X Screw Pitch Gauge.
- 1 X Die Holder.
- 2 X Tap Wrenches.
- 1 X Screwdriver.
-
Sale!
- Saber S4 Tap and Die Set - Metric + 1/8" NPT
- Tungsten steel taps and dies.
- 17 intermediate lead taps and 17 button dies.
- 3x0.5, 3X0.6, 4x0.7, 4X0.75, 5x0.8, 5X0.9, 6x1.0, 6X0.75, 7x1.0, 7X0.75, 8x1.0, 8x1.25, 10x1.25, 10x1.5, 12X1.5, 12x1.75.
- NPT1/8"x27
- 1 X Screw Pitch Gauge.
- 1 X Die Holder.
- 2 X Tap Wrenches.
- 1 X Screwdriver.
-
Sale!
- 1/2" x 14 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 3/8" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/4" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/8" x 28 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.