-
- Made of medium carbon steel
- 52 leaves
- Metric 60° range: 0.4-7.0mm
- Unified 60° range: 4-42TPI
- Metric leaves: 0.4, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
- Unified leave: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
-
Sale!Features • Main vial sensitivity of 1 minute • Each level is fitted with a main, cross and plumb vial • Main vial protected by rotating shroud • Vial solution maintains colour and fluidity under all workshop conditions • Precision ground cast base with vee groove for location on cylindrical work
-
Sale!Features • Accurately milled steel blades • Designed to check both internal and external thread forms • Marked with nominal size on each blade • All blades fixed in a steel sleeve • Screw cutting gauge included Combined SI Metric and Whitworth Number of Blades 49 Thread per mm METRIC 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1.0 1.25, 1.50, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0 TPI IMPERIAL 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60
-
Sale!
- Marking the centre of round plate and shafts
- Made of stainless steel
- Satin chrome plated
- Diameter of shafts: 6-220mm
- A:200mm, B:150mm, C:15mm, L:310mm
-
Sale!
- Marking the centre of round plates and shafts
- Made of stainless steel
- Satin chrome plated
- Diameter of shafts: 4-90mm
- A:100mm, B:70mm, C:12mm, L:153mm
-
Sale!Total Length of Blade 195mm Rule Width 5.5mm Rule Thickness 1.0mm Front Face Graduations 0.5,1.0mm Rear Face Graduations 1.0mm Base Length 79mm Full range rule adjustment Readings can be fixed by means of a locknut Rules are graduated on both sides Protractor plate is graduated 0deg - 180deg - 0deg Scale resolution 1/2 degree
-
Sale!FEATURES
- Can be used in workshop conditions exposed to coolant, water, dust or oil.
- Easy to use - no need to wipe or clean the scale.
- Advanced design styling.
- Incorporates absolute measurement system.
- Automatic power-on/off.
- With thumb roller.
- Supplied in fitted plastic case.
- Measurelink data output port.
-
Out of stock
- Range:50-75mm
- Graduation: 0.01mm
- Carbide measuring faces
- Ratchet stop
- Supplied with setting standard
- Meets DIN863-1
- L:82mm, a:15mm, b:49mm
-
Sale!
- For twist drills with 118° angle
- For checking if the centre of the tip is concentric with the drill body
- Made of stainless steel
- Accuracy: Angle +/-0.5°, Length +/-0.5mm
-
Sale!
- Made of hardened alloy steel
- Meets DIN2275
- Range: 0.05-1.00mm (20 leaves)
- 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00mm
- L: 300mm, A:285mm, B:590mm