- For twist drills with 118° angle
- For checking if the centre of the tip is concentric with the drill body
- Made of stainless steel
- Accuracy: Angle +/-0.5°, Length +/-0.5mm
-
Sale!
-
Sale!
- Made of hardened alloy steel
- Meets DIN2275
- Range: 0.05-1.00mm (20 leaves)
- 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00mm
- L: 300mm, A:285mm, B:590mm
-
- 300mm rod height
- Grooved bottom for cylinders
- Two pins to be set against the edge of the surface plate
-
Sale!
- Made of hardened alloy steel
- Meets DIN2275
- Range: 0.03-1.00mm (32 leaves)
- 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.80, 0.85, 0.90, 1.00mm
-
- Made of carbon steel
- Range: 0.25-6.0mm Metric 60º
- Number of leaves: 24
- Pitch of leaves, metric: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm
-
- Made of carbon steel
- Range: 0.4-7.0mm Metric 60º and 4-62TPI Whitworth 55º
- Number of leaves: 50
- Pitch of leaves, metric: 0.4, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 2.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
- Pitch of leaves Whitworth: 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60, 62TPI
-
- Made of medium carbon steel
- 52 leaves
- Metric 60° range: 0.4-7.0mm
- Unified 60° range: 4-42TPI
- Metric leaves: 0.4, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
- Unified leave: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
-
Sale!
- Range: 0-30mm
- Graduation: 0.1mm
- Accuracy: +/-0.10mm
- Made of stainless steel
-
Sale!
- Each piece has 3 concave and 2 convex gauging surfaces
- Supplied with handle
- Made of medium carbon steel
- Range: 0.5-13mm x 0.5mm
- Quantity of leaves: 26
-
Sale!
- For checking, identifying and specifying the roughness by symbol
- Rust proof, made of pure Nickel
- 30 specimens in set
- Specimens for Turning, Vertical Milling, Horizontal Milling, Plain Grinding, Reaming, Flat Lapping
-
Sale!
- Range: 1-29mm
- Graduation: 0.05mm
- 4 pieces (1-8mm, 8-15mm, 15-22mm, 22-29mm)
- Measure opening, slot width, hole diameter etc.
- Diameter correction table on back
- Made of stainless steel
-
Sale!
- 6 gauges per set
- Total range 8-150mm
- For quick measurement of inside diameter of holes and width of slots
- Satin chrome finish