-
• Suitable for mounting Linishall, and most other brand 6”, 8” or 10” Bench Grinders • Sheetmetal construction • 800m high -
Fits all Multitool models with a 7" (178mm) diameter sanding disc. Ideal for grinding ends square and adjusting lengths and angles.- Dimensions: 110mm x 204mm
- Tilt: Up 5° / Down 50°
- BracketSwivel: Plus and minus 60° from square
-
Sale!
Installs and removes easily to all Multitool models. Sharpens chisels to 50mm, plane blades to 60mm, power planer blades to 82mm. Re-tips screwdrivers. Professional results and cuts the correct angles without overheating. -
Sale!
FEATURES
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.
SPECIFICATIONS
- 36" x 2" (915 x 50mm) belt - 100 Grit
- 7" (178mm) diameter disc - 120 Grit
- 3 1/2" (89mm) diameter rubber contact wheel
- 5 1/2" (140mm) diameter drive wheel
- Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards
-
(Please note this item requires a forklift to unload. Please contact us for freight costs)
Overview
Manufactured in TaiwanFeatures
- 3 Axis digital readout fitted,
- 5HP 415V motor, inverter control variable speed system with automatic spindle brake (BM-70VE)
- High quality spindle speed control with digital readout
- NT40 Spindle taper with a 105mm chrome & ground quill
- Digital spindle speed readout
- Hardened & ground work table & slide-ways
- Square construction slides for X & Z axis to maximise rigidity
- Turcite B coated X & Y-Axis slide-ways reduces friction for smooth operation
- Pneumatic operation drawbar system for quick and effortless tool change
- Powered elevating motor for Z-Axis
- Meehanite casting for high strength & minimal deformation
- Quality electrics & overload protection in an easy access enclosure
- Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
- The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
- High / neutral and low gear selection lever to maximise torque
- Inverter controlled feed motors on X & Y-Axis
- Micro switch on the manual knee handle for additional operator safety
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Automatic quill feed 0.04, 0.08, 0.13mm/rev
- Automatic cut off depth stop on quill
- Automatic oil lubrication pump and reservoir
- Slide-way covers Y & Z-Axis
- Mill head tilts to ±45º forward and back
- Mill head tilts to ±90º left and right
- Manual quick action quill lever
- Tool box and manual
ORDER CODE M630D MODEL BM-70VE Digital Readout 3-Axis Digital Readout Type Vertical (mm)Table Size 1500 x 305 Spindle Taper - Vertical NT40 (mm)Longitudinal Travel (X-Axis) 1050 (mm)Cross Travel (Y-Axis) 420 (mm)Vertical Travel (Z-Axis) 500 Type of Slides Dovetail (X), Square (Y & Z) (mm)Ram Travel 485 (mm)Spindle to Table 460 (mm)Spindle Travel / Diameter 155 / 105 (mm)Throat Depth (max.) 750 Tilting Head (Left ~ Right) ±90º Tilting Head (Forward ~ Back) ±45º (mm/rev)Power Feed - Quill 0.04 / 0.08 / 0.13 (mm/min)Power Feed - Longitudinal (X-Axis) 30 - 3000 (mm/min)Power Feed - Cross (Y-Axis) 30 - 3000 (mm/min)Power Feed - Vertical (Z-Axis) Rapid (inch / mm)Table T-Slot Size 5/8 (kg)Work Table Load Capacity 500 (No./ rpm)Spindle Speeds Vertical Inverter (70 - 4200) (kW / hp)Motor Power - Vertical 3.75 / 5 (V / amp)Voltage / Amperage 415 (cm)Shipping Dimensions (L x W x H) 160 x 170 x 240 (kg)Nett Weight 1800 -
Sale!
Features
- 800kg capacity
- 580 to 970mm height adjustment
- Cast iron construction
- V-Type roller stand
- 2x (Ø52mm x 125mm) steel roller
-
Sale!
Features
- 800kg capacity
- 580 to 970mm height adjustment
- Cast iron construction
- Single roller stand
- Ø52mm x 350mm steel roller
-
W 450 (mm)H (Minimum) 715 (mm)H (Maximum) 1050 -
W 290 (mm)H (Minimum) 505 (mm)H (Maximum) 800 -
Features
-
- Roller capacity of 50kg each
- 20 x Zinc plated steel rollers at 150mm pitch
- Rollers are Ø50mm with commercial bearings
- Frames are powder coated
- Conveyor is pre-assembled with 7 cross-members
- Frames are pre-drilled at 75mm pitch to accept "Optional 19 rollers" totalling to 39 rollers
- Please Note:
- Roller load capacity is calculated on even weight distribution over entire roller
- Total load capacity is calculated on even weight distribution over entire roller conveyor system
MODEL RC-450 (kg)Roller Load Capacity - (each) 50 (kg)Total Load Capacity 1000 (No.)Number of Rollers 20 (mm)Table Width (W) 450 (mm)Table Length (L) 3000 (mm)Roller Table Height (H) 80 (mm)Roller Diameter Ø50 -
-
W 450 (mm)H (Minimum) 505 (mm)H (Maximum) 800 -
W 290 (mm)H (Minimum) 715 (mm)H (Maximum) 1050
