- Return Spring – Old Type (Refer Spring Upgrade Assembly)
-
-
- Dimensions: 250 extends max to 320 mm
- Spring Steel
- Included: Spring x 1, Clevis x 2, Clevis Pin x2, Washer & Nut x 2
-
Replacement brass vice nut to suit Super 315A, S315D, S350D, S350G, S400B and S400G Brobo coldsaws -
(Please note this item requires a forklift to unload. Please contact us for freight costs)
Features
- 3 Axis digital readout fitted
- 5HP 415V motor with mechanical variable speed system
- NT40 Spindle taper with a chrome & ground quill
- Digital speed readout display for accurate cutter speed
- Hardened & ground work table & slide-ways
- Square construction slides for Y & Z-Axis to maximise rigidity
- Powered elevating motor for Z-Axis
- Meehanite casting for high strength & minimal deformation
- Quality electrics & overload protection in an easy access enclosure
- Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
- The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
- High / neutral and low gear selection lever to maximise torque
- X & Y-Axis power-feed with adjustable micro switch feed stops
- Micro switch on the manual knee handle for additional operator safety
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Automatic quill feed 0.04, 0.08, 0.15mm/rev
- Automatic cut off depth stop on quill
- Oil lubrication pump and reservoir
- Slide-way covers Y & Z-Axis
- Mill head tilts to ±45º forward and back
- Mill head tilts to ±90º left and right
- Manual quick action quill lever
- Mechanical spindle brake
- Tool box and manual
Includes
- 3 Axis digital readout fitted
- Digital speed readout display
- Z-Axis powered elevating motor
- X & Y-Axis power-feeds
- One-shot oil lubrication pump and reservoir
- Machine vice (160mm)
- Clamp kit
- Drawbar M16 thread
- Coolant system
- Slideway covers
- Halogen light
- Safety cutter guard
- Swarf tray
MODEL BM-53VE Digital Readout 3-Axis Digital Readout Type Vertical (mm)Table Size 1370 x 254 Spindle Taper - Vertical NT40 (mm)Longitudinal Travel (X-Axis) 910 (mm)Cross Travel (Y-Axis) 400 (mm)Vertical Travel (Z-Axis) 415 Type of Slides Dovetail (X), Square (Y & Z) (mm)Ram Travel 555 (mm)Spindle to Table 465 (mm)Spindle Travel / Diameter 127 / 86 (mm)Throat Depth (max.) 635 Tilting Head (Left ~ Right) ±90º Tilting Head (Forward ~ Back) ±45º (mm/rev)Power Feed - Quill 0.04 / 0.08 / 0.15 (mm/min)Power Feed - Longitudinal (X-Axis) 20 - 2000 (mm/min)Power Feed - Cross (Y-Axis) 20 - 2000 (mm/min)Power Feed - Vertical (Z-Axis) Rapid (inch / mm)Table T-Slot Size 16 (kg)Work Table Load Capacity 350 (No./ rpm)Spindle Speeds Vertical Variable (50 - 3550) (kW / hp)Motor Power - Vertical Spindle 3.75 / 5 (V / amp)Voltage / Amperage 415 (kg)Nett Weight 1545 -
Sale!
- Designed to fit the Linishall 915 belt and disc grinding attachment
- Side tilting for stable grinding against the disc
-
Sale!
• Fits easily to most 200mm (8”) bench grinders • Belt size: 915 mm x 50 mm (36”x2”) • Disc size: 178 mm (7”) • Rugged cast metal construction • Simple assembly & adjustment • Longer rubber contact wheel life • Easy belt tracking with no tools required -
FEATURES
New generation machines with the latest technology and design.- New Rigid Frame Design Provides increased life of cutting tools.
- New Extra Large 165mm Stroke Enables the use of long tooling such as extension arbors and large depth cutters for drilling box section steel in one pass, twist drills, reamers, taps etc.
- Magnetic Field Shape Control (MFSC) Provides maximum holding power on thin materials.
- Lightweight & Powerful The new generation Holemaker machines are lighter and more powerful than other brands on the market.
- Multi-purpose machine able to use Holemaker cutters, no. 2 Morse taper shank drills & reamers, as well as a drill chuck
- Industrial 2-speed gearbox
- Cast-iron motor housing
- Through spindle coolant system, with an external side mounted gravity feed coolant tank
- Left or right hand feed handle operation
- Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience
- Smart magnet technology to ensure sufficient magnetic adhesion
- Supplied in a blow mould plastic carry case
- Suitable for steel fabrication, engineering workshops & maintenance facilities where a heavy-duty versatile machine is highly beneficial
- Supplied complete with arbor for use with Holemaker cutters up to 50mm depth of cut (3/4" shank)
- #2MT drill chuck SA20102 available separately
SPECIFICATIONS
- Capacity (Diameter): 52mm
- Capacity (Depth): 52mm
- Capacity (Twist Drills): #2 Morse Taper 23mm
- Motor Power: 1100 Watt
- Input Power: 1200 Watt Single Phase 240V
- Speed: 2 Speed 240 / 480rpm
- Weight: 16.5kg
- Magnetic Dead Lift: 9,900Nm On 25mm Steel Plate
- Stroke: 165mm
- Height (Min. / Max.): 456mm / 616mm
-
Sale!
- Wheel size: 200mmx 25mm
- Spindle thread: 5/8" UNC
- Powerful; 750W (1HP) induction motor
- Speed: 2,950RPM
- Cast iron body and base for long lasting performance
- Capacitor start / run motor
- Voltage: 240V 50Hz
- NVR safety switch
- Large eye shields for added user safety Heavy duty tool rests
- 3 YEAR WARRANTY
-
Industrial quality stand suit specific MACC Coldsaw. Top Dimensions: 55cm x 55cm Base Dimensions: 65cm x 65cm Height: 77cm Weight: 26.5kg -
Sale!
- Cutter capacity : 42mm
- Cutter depth: 52mm
- Twist drill capacity* : 13mm
- Weight: 12.5kg
- 165mm stroke
- 1020watt 240V motor
- 440rpm
- 9,900nm adhesion on 25mm steel plate
-
Sale!
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- Powerful 1HP induction motor
- Cast iron body and base for long lasting performance
- Capacitor start / run motor
- NVR safety switch
- Large eye shields for added user safety Heavy duty tool rests
- Fully Assembled
- 3 YEAR WARRANTY
- 50mm x 915mm (2" x 36") belt (100 grit included)
- 178mm (7") diameter disc (120 grit included)
- 89mm diameter rubber contact wheel
- 140mm diameter drive wheel
-
PVC 670mm x 300mm Packet of 4