-
Spring loaded drill press chuck guard with 55mm clamp to suit BD-325 and PD-325 drill presses. -
#41+#40 Handle and Knob to suit PD-35 Drill Press -
Heavy duty roller conveyor with height adjustment to suit machines from 640mm to 1000mm height range. Includes 7 rollers with pillow bearings. 1 ton per metre weight capacity. Made in Australia. -
Ø45mm x 0.7mm x 1300mm L x 30mm -
Plastic Gear(Φ91.5×15×107T) suit Align AL-500 Series power feeds. -
- Swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation. - Trigger switch with manual down feed for small quick cuts. - Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
-
FEATURES:- Manual Control Panel - Only control panel with buttons.
- Inverter - Provides to adjust blade speed up to workpiece diameter, thickness and hardness.
- Hydraulic Vise - Pressure, clamping period and clamping time can be adjusted.
- Swarf Brush - Removes swarfs to keep clean the wheels and blade.
- Hydramechanical Blade Tensioning - Tensioning period and tensioning time can be adjusted. So blade does not relax and curve cutting gets prevented.
- Blade Bedding with Carbide and Bearings
- Rotating Table
- 60 cm Long Material Stopper System
- Bevel Helical Gearbox
- Moveable Guide Arms
- Adjustable Bow Down Speed
- Adjustable vise Tension
- Easy Readable Angle Ruler
- Main Motor : 4 kW
- Gearbox : Bevel Helical PKD 2390 High Efficiency
- Hydraulic Motor : 0,37 kW
- Hydraulic Tank Capacity : 8 Liter
- Coolant Motor : 0,12 kW
- Coolant Tank Capacity : 30 liters
- Blade Speed : 25-90 m/min
- Blade Dimensions : 4780 x 34 x 1,1 mm
- Machine Weight : 1.350 kg
- Machine Dimensions : 1400 x 2350 x 1500 mm
- Table Height : 750 mm
-
Benefits:- Control Panel – easy to reach and easy to control
- Coolant Pump - fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both carbide guide assemblies
- Powerful motor with variable speed 20-90 m/min
- Heavy Duty direct dive gearbox – built tough – can cut all day non-stop
- Blade guides with rollers and carbide pads provide precise support for the blade guarantee longer blade life.
- Variable speed – giving you a clean and fast cut for all materials, from aluminium to stainless steel to induction harden chrome bar
- Blade brush to keep the blade clean from swarf
- Low working height - only 730mm
- Height adjustment switch to save you time when cutting smaller jobs
- Hydromechanic Blade Tension – gives you the correct amount of blade tension, critical for straight cuts and longer blade life
- Material Limit Shaft – machines stops once the cut is completed
- Automatic blade break protection
- Constructed in heavy gauge steel, giving you a strong rigid saw frame, providing a high degree of accuracy when cutting.
- Motor - 1.5kW (415v - 3phase)
- Blade Speed - 25 - 90 m/min (variable)
- Blade Dimensions - 3150 x 27 x 0.9 mm
- Machine Weight - 480kg
- Machine Dimensions - 750 x 1650 x 1150 mm
- Table Height - 730 mm
-
- Up to 60° mitre cutting
- Variable Speed 25-100m/min
- Quick lock vice
- Coolant System
- Digital Display
- Includes stand
- Cast Iron saw frame
- Carbide blade guides
- Low voltage electrics
- Emergency Stop
- Automatic (variable) down feed
- 250mm vice opening
- Mechanical blade tension microswitch
- Includes infeed roller, 500mm adjustable end stop & one blade fitted
-
Overview
For cold or hot bending of flat, round, and square steelFeatures
- COLD BENDING - Flat 100x7mm, Square 20x20mm, Round Ø20mm, Angle Steel 75x8mm (only with pre-notching)
- HOT BENDING - Flat 100x12mm, Square 22x22mm, Round Ø22mm, Angle Steel 100x12mm (only with pre-notching)
- Mount to work bench with 4 mounting holes for sturdy operation
- Adjustable bending stop with angle scale up to 120°
- Adjustable material length stop for repeatability
- Eccentric quick action cam lever material clamp
- Wide supporting face ensuring safe and reliable operation
-
Out of stock
- 875mm length
- 38mm W
- 28deg
- Suits Delta 3VH and others
-
Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs)-
- Dual miter 60° to -45°
-
- Quick lock vice
-
- Coolant System
-
- Digital Display
-
- Includes stand
-
- Cast Iron saw frame
-
- Carbide blade guides
-
- Low voltage electrics
-
- Emergency Stop
-
- Automatic (variable) down feed
-
- 245mm vice opening
-
- Mechanical blade tension microswitch
-
- Includes infeed roller, 500mm adjustable end stop & one blade fitted
-
