Call Us Today! (08) 8262 6199|generaltools@bigpond.com

Machine Tool Accessories

  • Sale!

    Vertex 4″ Anglock Milling Vice

    Original price was: $440.00.Current price is: $370.00. VA-4
    Vertex 4" Anglock Milling Vice. 106mm jaws. 36mm jaw height. 103mm opening. Semishphere in moving jaw thrusts moveable jaw downward on horizontal force creating the angle lock feature. Leadscrew and sliding surface hardened and ground. Swivel base. Max. clamping force 1500kgf. A:106mm, B:36mm, C (Max):103mm, D:90mm, E:324mm, E1:351mm, F:13mm, G:211mm, H:96mm, I:126mm, J:242mm, K:228mm, L:14.5mm, M:75mm, N:16mm, P:15mm.
    Add to cart Details
  • Sale!

    Toolmaster 250mm x 125mm Magnetic Chuck

    Original price was: $440.00.Current price is: $374.00. C300
    250mm x 125mm
    120 (N/cm2) Magnetic Force
    Features
    • Cam-operated On/Off handle to hold and release the work-piece
    • Powerful permanent magnets
    • Thick top and base plate for maximum rigidity
    • The fine pitched magnetic poles make it suitable for small and thin pieces.
    • Includes rear keeper plate
    Dimensions (L x W x H) 250 x 125 x 48
    (N/cm2)Magnetic Force 120
    (mm)P 1 + 3
    (mm)L 250
    (mm)B 125
    (mm)H 48
    (mm)T 20
    (kg)Nett Weight 14
    Add to cart Details
  • Sale!

    Toolmaster M5-M12 Reversible Tapping Chuck

    Original price was: $440.00.Current price is: $374.00. T004
    Include 3MT & 4MT Arbours
    M5 - M12
    Features
      • Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
      • Tension and compression feature compensates between rate of feed applied and thread pitch
      • Suitable for right and left hand, vertical and horizontal tapping
      • Fast tap reversal. Re-entry cushioning eliminates cross threading
    • Clutch Torque Setting:
    • 1 - 5 Nm
    • 2 - 20 Nm
    • 3 - 50 Nm
    • 4 - 75 Nm
    Includes
    • MT3 & MT4 x JT6 arbors
    • 2 x Collet chuck spanners
    • 2 x Rubber flex collets
    • 2 x allen keys
    Arbor Mount JT6
    (MT)Taper 3 & 4
    (mm)Tapping Range 5 - 12
    (mm)Tapping Shank Size 3.5 - 10
    (mm)D 75
    (mm)D1 28
    (mm)L 150
    (mm)L1 105
    (mm)A 45
    (mm)B 12
    (kg)Nett Weight 4.2
    Add to cart Details
  • Sale!

    General Tools 25mm Turning Tool Kit

    Original price was: $450.00.Current price is: $375.00. GTVTTK-25
    Turning kit with 25mm height. Set includes right hand and left hand turning tools and a boring bar. The kit is designed so that all the tools use the same inserts. The inserts used in this kit are ISO standard Tungaloy brand made in Japan. Turning tool kit contains: Vertex WWLNR-2525M08 right hand turning tool Vertex WWLNL-2525M08 left hand turning tool Vertex S25R-MWLNR08 boring bar 10 off Tungaloy WNMG080408 inserts
    Add to cart Details

  • Vertex ER32 Collet Set 18Pc 2-20mm

    $380.00 V-32000
    Vertex ER32 Collet Set 18Pc 2-20mm
    Add to cart Details
  • Sale!

    Vertex 4″ Horizontal/Vertical Rotary Table

    Original price was: $484.00.Current price is: $410.00. HV-4
    Vertex 4" Horizontal/Vertical Rotary Table. Made from high density Meehanite. Hardened and ground worm. 90:1 ratio. 360 degree graduation, one turn of handle moves table through 4 degrees. Microcollar graduated in steps of 2 min, vernier scale makes settings down to 20 seconds possible. 72mm height. 11mm T slots.
    Add to cart Details
  • Sale!

    Vertex 6″ Horizontal/Vertical Rotary Table

    Original price was: $484.00.Current price is: $410.00. HV-6
    Vertex 6" Horizontal/Vertical Rotary Table. Made from high density Meehanite. Hardened and ground worm. 90:1 ratio. 360 degree graduation, one turn of handle moves table through 4 degrees. Microcollar graduated in steps of 2 min, vernier scale makes settings down to 20 seconds possible. 80mm height. 11mm T Slots.
    Add to cart Details
  • Sale!

    Vertex 5″ Anglock Milling Vice

    Original price was: $506.00.Current price is: $410.00. VA-5
    Vertex 5" Anglock Milling Vice. 135mm jaws. 36mm jaw height. 110mm opening. Semishphere in moving jaw thrusts moveable jaw downward on horizontal force creating the angle lock feature. Leadscrew and sliding surface hardened and ground. Swivel base. Max. clamping force 2000kgf. A:135mm, B:36mm, C (Max):110mm, D:97mm, E:359mm, E1:394mm, F:17mm, G:246mm, H:101mm, I:133mm, J:277mm, K:255mm, L:14.5mm, M:85mm, N:16mm, P:15mm.
    Add to cart Details
  • Sale!

    Vertex 6″ Anglock Milling Vice

    Original price was: $539.00.Current price is: $420.00. VA-6
    Vertex 6" Anglock Milling Vice. 155mm jaws. 46mm jaw height. 150mm opening. Semishphere in moving jaw thrusts moveable jaw downward on horizontal force creating the angle lock feature. Leadscrew and sliding surface hardened and ground. Swivel base. Max. clamping force 2500kgf. A:155mm, B:46mm, C (Max):150mm, D:110mm, E:452mm, E1:452mm, F:20mm, G:288mm, H:118mm, I:158mm, J:326mm, K:302mm, L:19mm, M:95mm, N:16mm, P:17mm.
    Add to cart Details
  • Sale!

    Toolmaster M8-M20 Reversible Tapping Chuck

    Original price was: $495.00.Current price is: $420.00. T005
    Features
      • Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
      • Tension and compression feature compensates between rate of feed applied and thread pitch
      • Suitable for right and left hand, vertical and horizontal tapping
      • Fast tap reversal. Re-entry cushioning eliminates cross threading
      • Clutch Torque Setting:
      • 1 - 12 Nm
      • 2 - 20 Nm
      • 3 - 60 Nm
      • 4 - 110 Nm
    • Please Note: M20 tap requires a 14mm Shank
    Includes
    • MT3 & MT4 arbors - threaded end
    • 2 x Collet chuck spanners
    • 2 x Rubber flex collets
    • 2 x allen keys
    MODEL T4-MT4
    Arbor Mount Threaded
    (MT)Taper 3 & 4
    (mm)Tapping Range 8 - 20
    (mm)Tapping Shank Size 6.3 - 14
    (mm)D 90
    (mm)D1 38
    (mm)L 195
    (mm)L1 134
    (mm)A 62
    (mm)B 20
    Add to cart Details
  • Sale!

    Toolmaster 250mm 3 Jaw Lathe Chuck Camlock Mount D1-6

    Original price was: $506.00.Current price is: $430.00. C263
    250mm
    D1-6 Camlock Mount
    Overview
    K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002
    Features
    • World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
    • ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
    • Each chuck is supplied with a set of inside and outside jaws and a chuck key
    Includes
    • Outside jaws
    • Inside jaws
    • Mounting screws
    • Chuck key
    ORDER CODE C263
    (mm)Chuck Size Ø250
    Camlock D1-6
    (mm)Outside Jaw 6 - 110
    (mm)Inside Jaw 90 - 250
    (rpm)Speed 2400
    (mm)D1 106.3
    (mm)D2 226
    (mm)D3 80
    (mm)H 120
    (mm)H1 80
    (mm)h 5
    (kg)Nett Weight 26
    Add to cart Details

  • Vertex 250mm 3 Jaw Self Centering Lathe Chuck Plain Back

    $440.00 VSC-10A
    Vertex 250mm 3 Jaw Self Centering Lathe Chuck Plain Back. OD gripping range 6-220mm. ID gripping range 70-250mm. 2 sets of solid jaws. D: 250mm, d1: 226mm, d2: 206mm, d3: 80mm, L: 120mm, L1: 80mm, h: 5mm, Thread M12. Weight: 26.5kg Max. RPM: 1400
    Add to cart Details
Go to Top