-
ER40 collet chuck, backplate mount, 100mm diameter. -
Sale!
Vertex 12" Horizontal/Vertical Rotary Table. Made from high density Meehanite. Hardened and ground worm. 90:1 ratio. 360 degree graduation, one turn of handle moves table through 4 degrees. Microcollar graduated in steps of 1 min, vernier scale makes settings down to 10 seconds possible. 125mm height. 16mm T slots. -
Sale!
3mm parting inserts to suit Toolmaster L469 (26mm x 3mm) and L4693 (32mm x 3mm) parting blades.KC5025Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate. Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates. -
Sale!
Parting Block Suits 26mm Blade 12mm Centre Height.Blade Size (h1) 26 x 2 or 26 x 3 (mm)h 12 (mm)b 16 (mm)L 87 -
Sale!
Toolmaster R8-MT3 Morse Taper Adaptor 7/16" UNF Drawbar Thread Precision ground and hardened. Morse taper adaptors are used to adapt a Morse taper tool or cutter to a spindle taper -
Sale!
- Precision ground with 1/2" Whitworth drawbar thread
- For using drill chucks in drill mill machines
-
Solid design, main body made of FC15, with heat treated black oxide finished steel jaws HRC 45-50. Front fixed prismatic jaw with cross V-grooves designed for clamping work piece firmly in both vertical and horizontal positions. A: 84mm, B:31mm, C:100mm (opening), D28.5mm, E:220mm, E1:343mm, F:13mm, G:78mm, H:63mm, I:102mm, J:200mm, L8mm, M36mm, Weight:5.7kg -
Overview
Sino MK series DRO scales offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Scales lengths available in a range from 170mm to 1020mm. Compact scales available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- Scale body made from extruded aluminium with wiper seals
- Glass scale with 5µm resolution
- 3m connection cable with 9 pin D-Sub connector
- The slide carrier of the MK series scales uses Japanese NSK bearings to provide high precision, low noise and long service life
- Includes cover & mounting screws
- An easy-to-follow D.I.Y. Installation Manual is supplied with each system, complete with illustrations and mounting brackets
Optional Accessories
- Mounting backing plate to suit (D5251) available for ease of installation on non-machined surfaces
-
Overview
Sino MK series DRO scales offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Scales lengths available in a range from 170mm to 1020mm. Compact scales available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- Scale body made from extruded aluminium with wiper seals
- Glass scale with 5µm resolution
- 3m connection cable with 9 pin D-Sub connector
- The slide carrier of the MK series scales uses Japanese NSK bearings to provide high precision, low noise and long service life
- Includes mounting backing plate, cover & mounting screws
- An easy-to-follow D.I.Y. Installation Manual is supplied with each system, complete with illustrations and mounting brackets
-
Overview
Sino XH series DRO Counters offer an affordable low cost solution for your Lathe or Milling machine digital readout requirements. Together with the MK series scales and mounting bracket kits sold separately let the Sino XH series digitalise your lathe or mill experience. Standard series scales available ranging from 220mm to 1020mm and Compact series available ranging from 170mm to 270mm specially designed to suit X-Axis travels on Lathes.Features
- 2-Axis digital display
- Multifunction display for lathes or milling machines
- Inch / metric display
- Mid point calculation
- Absolute & incremental (ABS/INC)
- Pre-set datum coordinates
- Bolt hole circle and line positioning
- Arc and slope processing
- Angle display mode
- Load default setup
- Clear zero
- Power off memory
- Brightness adjustment
- 5µm accuracy
- 240V
-
Sale!
250mmD1-6 Camlock MountOverview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
- Outside jaws
- Inside jaws
- Mounting screws
- Chuck key
ORDER CODE C263 (mm)Chuck Size Ø250 Camlock D1-6 (mm)Outside Jaw 6 - 110 (mm)Inside Jaw 90 - 250 (rpm)Speed 2400 (mm)D1 106.3 (mm)D2 226 (mm)D3 80 (mm)H 120 (mm)H1 80 (mm)h 5 (kg)Nett Weight 26 -
Sale!
200mmD1-4 Camlock MountOverview
K11 SERIES Cast Iron Body Standard GB/T 4346.2-2002Features
- World-class and industry leader in the manual lathe chuck field with over 30 years of manufacturing
- ToolMaster quality assurance and accuracy testing ensure standards remain high. ToolMaster is ISO 9001-2000 approved
- Each chuck is supplied with a set of inside and outside jaws and a chuck key
Includes
- Outside jaws
- Inside jaws
- Mounting screws
- Chuck key
ORDER CODE C262 (mm)Chuck Size Ø200 Camlock D1-4 (mm)Outside Jaw 4 - 85 (mm)Inside Jaw 65 - 200 (rpm)Speed 3000 (mm)D1 63.52 (mm)D2 180 (mm)D3 50 (mm)H 109 (mm)H1 75 (mm)h 5 (kg)Nett Weight 18
