- 3/8" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
-
Sale!
Tungsten tap and die set in metal case contains: UNC Taps (2 each): #4x40, #6x32, #8x32, #10x24, #12x24, 1/4"x20, 5/16"x18, 3/8"x16, 7/16"x14, 1/2"x13, 9/16"x12, 5/8"x11, 3/4"x10 UNF Taps (2 each): #10x32, 1/4"x28, 5/16"x24, 3/8"x24, 7/16"x20, 1/2"x20, 9/16x18, 5/8"x18, 3/4"x16 UNS Taps (2 each): 1/4"x24, 1/4"x32 Metric Taps (2 each): M6x1.0, M8x1.25, M10x1.5, M10x1.0, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5 35 corresponding dies 2 adjustable tap holders 1 T-handle tap holder 2 die holders -
Sale!
5PC Set contains 14, 16, 18, 20, 22mm cutters plus pilot pin TITANIUM NITRIDE COATING The Titanium Nitride coating significantly increases the tool life by providing the following benefits: • Increased surface hardness to 85HRC • Ceramic surface, reducing friction by up to 30% • Especially resistant to cold welding • Suitable for cutting a wide range of materials M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines. -
Sale!
Overview
Metric Keyway Broach Set manufactured from HSS complete with bushes from 12-30mm and packing shimsFeatures
- Supplied in aluminium case
- Weight: 3.8kg
Includes
- 4 x Broaches - 4, 5, 6, 8mm
- 13 x Bushes - 12, 14, 15, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30mm
- 5 x Packing shims
-
Australian made 7pc 1/2" reduced shank drill set. Set contains:- 14mm
- 15mm
- 16mm
- 17mm
- 18mm
- 19mm
- 20mm
-
Sale!
- Machine use
- Morse Taper Shank #3
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 tolerance
- Material: HSS
- Helix angle: L10
- Standard: DIN208
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Tolerance: ISO2/6H
- Finish: Bright
- Type: Straight Flute
-
Sale!
Material: HSS Surface Finish: Blue Steam Tempered Ground shank Geometry: R30 Point Type: 118° Form A General purpose drill suitable for materials up to 900N/mm2 Flute length: 185mm Overall length: 334mm Morse taper: #4 -
Sale!
118° Standard Point - For general purpose applications Precision Engineered Parallel shank - For accurate hole size Made from M2 High Speed Steel (HSS) - Offers the best combination of strength, heat & wear resistance Bright Finish - For general purpose applications, non-ferrous metals & plastics. Designation: N Material: HSS Finish: Brt Max Cut Depth: 5xD Shank Form: A Helix Angle: Designation: N Point Tolerance: h8 Point Angle: 118° Point Form: Form A Standard: ANSI B94-11 / DIN338 60 Piece Metal case -
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.- BS949
- Tolerance CL2
- Overall length 229mm
- Thread length 83mm
- Tapping drill 17.5mm
-
Sale!
5PC Set contains 14, 16, 18, 20, 22mm cutters plus pilot pin- M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
- STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
- MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring
- FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
- UNIVERSAL SHANK 19.05mm (3/4″) Universal Shank with 2 flat sections to suit most magnetic base drilling machines
-
Sale!
Overview
Imperial Keyway Broach Set manufactured from HSS complete with bushes from 1/2" - 1 1/2" and packing shimsFeatures
- Supplied in aluminium case
- Weight: 4.55kg
Includes
- 4 x Broaches - 1/8", 3/16", 1/4", 3/8"
- 9 x Bushes - 1-1/2", 1-3/8", 1-1/4", 1-1/8", 1", 7/8", 3/4", 5/8", 1/2"
- 5 x Packing shims