-
Out of stock
- M6-M24 Taps and Dies
- 40 HSS Metric taps & dies - fine & coarse threads:
- M6x1.0, M6x0.75, M8x1.25, M8x1.0, M10x1.5, M10x1.25, M12x1.75, M12x1.5, M14x2.0, M14x1.5, M16x2.0, M16x1.5, M18x2.5, M18x1.5, M20x2.5, M20x1.5, M22x2.5, M22x1.5, M24x3.0, M24x1.5
- Includes: 50mm die handle, Die adaptor, Standard tap wrench, "T" type tap wrench & Screw driver
-
The Excision tension meter is the easiest way to measure and check the tension of your bandsaw blade. Calibrating your bandsaw blade tension with ease and precision, will give you optimal blade life whilst not putting your machine at risk of long term damage due to over-tensioning. The tension meter is designed for bandsaw blades from 6mm to 80mm width and thickness of 0.5mm to 1.6mm blades.The Excision tension meter is very easy to use: simply attach to bandsaw blade (whilst no tension is applied), set gauge at ‘0’, then start applying tension and watch the gauge until the correct tension is applied.
-
Sale!Set contains:
- Intermediate taps M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75
- 1" OD Button Dies: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75
- Tap wrench #1.5 bar type
- 1" OD button die holder
- Thread pitch gauge
-
Sale!
- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Premium quality M2-HSS Tapping Jobber Drills.
- Taps (Taper/Inter/Bottom for each): M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, M12x1.75.
- Drills: 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.50MM, 10.20MM.
-
Sale!
- 1/2" x 14 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- General purpose use
- Set includes, Taper, Intermediate and Bottoming tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Finish: Bright
- Tolerance: Z3
-
Sale!Material: HSS Surface Finish: Blue Steam Tempered Ground shank Geometry: R30 Point Type: 118° Form A General purpose drill suitable for materials up to 900N/mm2 Flute length: 195mm Overall length: 344mm Morse taper: #4
-
Sale!
- LEFT HAND HSS Bright Finish Metric Coarse Hand and Machine Intermediate Tap.
- HSS Straight Flute Short Machine and Hand Taps.
- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Metric Coarse angle of thread is 60 degrees.
- The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
- Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
- Recommended tapping drill diameter: 18.5mm
-
Sale!Coldsaw Blades Excision HSS 370 x 3.0 x 32  240 teeth Diameter: 370mm Bore size: 32mm Thickness: 3.0mm Teeth number: 240 Made in Italy from highest quality High Speed Steel.
- Satisfaction guaranteed
- Long lasting – high wear resistance
- Supplied in quality boxes
- Can be resharpened