| Blade Size (h1) | 26 x 2 or 26 x 3 |
|---|---|
| (mm)h | 12 |
| (mm)b | 16 |
| (mm)L | 87 |
-
Sale!
Parting Block Suits 26mm Blade 12mm Centre Height. -
Sale!
- Material: SCM-21
- Hardness: HRC 50º - 55º
-
Sale!Out of stock
Features
- Brazed carbide tipped boring bar
- These sets contain a variety of different size bars for large and small bores
- 18mm shanks
-
Sale!
NOTE: Inserts not included Use insert TPMN1603Features
- 45º high speed chamfer cutter.
-
Sale!
- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
(mm / inch)Drawbar 1/2" Taper 3MT (mm)D 25.4 (mm)C 40 (mm)G M24 x P2 (mm)L 90 (kg)Nett Weight 1.12 -
Sale!
5 piece tungsten carbide burr set - (double cut) suitable for steel, cast iron, light aluminium and non-ferrous metalsShank Diameter x Length 1/4" x 6" (inch)Ball Diameter SD-3, 3/8"SD-5, 1/2"(inch)Cylindrical Radius End (Dia. x Length) SC-5 1/2" x 1" (inch)Tree Radius End (Dia. x Length) SF-5, 1/2" x 1" (inch)Tree Pointed End (Dia. x Length) SG-5, 1/2" x 1" -
Sale!
- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
(mm / inch)Drawbar 12mm Taper NT30 (mm)D 25.4 (mm)C 40 (mm)G M24 x P2 (mm)L 90 -
Sale!
Overview
2MT adaptor to suit broach cutters with 19mm shanks. Ideal for bench and pedestal drills where large holes to 50mm need to be produced. The adaptor will hold 12 ~ 50mm broach cutters, but using cutters over 25mm will depend on the power and strength of the machine. Note! Cutters and pin not included Note! Coolant must be used when using the cuttersFeatures
- Internal rotary coolant coupler
- Coolant bottle and hose
-
Sale!
Overview
3MT adaptor to suit broach cutters with 19mm shanks. Ideal for bench and pedestal drills where large holes to 50mm need to be produced. The adaptor will hold 12 ~ 50mm broach cutters, but using cutters over 25mm will depend on the power and strength of the machine. Note! Cutters and pin not included Note! Coolant must be used when using the cuttersFeatures
- Internal rotary coolant coupler
- Coolant bottle and hose
-
Sale!
- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
(mm / inch)Drawbar 16mm Taper NT40 (mm)D 25.4 (mm)C 40 (mm)G M24 x P2 (mm)L 90 -
Sale!
Cast iron back plate finished machined on one side to fit D1-4 spindle nose. The other face and outside diameter need to be machined to suit chuck size.Camlock D1-4 (mm)Flange Diameter Ø200 (mm)Bore Ø63 (kg)Nett Weight 7 -
Sale!
150 - 170mm Lathe Centre HeightOverview
Manufactured from carbonised and hardened steel.Features
- All bearing surfaces are precision ground to ensure rigidity
- Handy lathe accessory for tool rooms and general engineering shops
- Ease of operation cuts set-up time by 90%
- No shims are required to adjust tools to correct centre height
- Easily fitted to most centre lathes
- Please Note: Some machining required to suit your lathe
Includes
- 4 x Square Tool Holders - for 16mm tools
MODEL QA-140 (mm)Lathe Centre Height 150 - 170 (mm)Lathe Swing 300 - 340 (mm)A 5 (mm)B 13 (mm)C 60 (mm)D 66 (mm)H 29 - 50 (mm)h 70 (mm)S 16 (mm)T 16 (No.)Number of Sides 2 (No.)Number of Holders 4 (kg)Nett Weight 6.2