- M6-M24 Taps and Dies
- 40 HSS Metric taps & dies - fine & coarse threads:
- M6x1.0, M6x0.75, M8x1.25, M8x1.0, M10x1.5, M10x1.25, M12x1.75, M12x1.5, M14x2.0, M14x1.5, M16x2.0, M16x1.5, M18x2.5, M18x1.5, M20x2.5, M20x1.5, M22x2.5, M22x1.5, M24x3.0, M24x1.5
- Includes: 50mm die handle, Die adaptor, Standard tap wrench, "T" type tap wrench & Screw driver
-
Out of stock
-
Sale!
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
-
- Clutch Torque Setting:
- 1 - 12 Nm
- 2 - 20 Nm
- 3 - 60 Nm
- 4 - 110 Nm
- Please Note: M20 tap requires a 14mm Shank
Includes
- MT3 & MT4 arbors - threaded end
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
MODEL T4-MT4 Arbor Mount Threaded (MT)Taper 3 & 4 (mm)Tapping Range 8 - 20 (mm)Tapping Shank Size 6.3 - 14 (mm)D 90 (mm)D1 38 (mm)L 195 (mm)L1 134 (mm)A 62 (mm)B 20 -
-
Sale!Include 3MT & 4MT ArboursM5 - M12
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
- Clutch Torque Setting:
- 1 - 5 Nm
- 2 - 20 Nm
- 3 - 50 Nm
- 4 - 75 Nm
Includes
- MT3 & MT4 x JT6 arbors
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
Arbor Mount JT6 (MT)Taper 3 & 4 (mm)Tapping Range 5 - 12 (mm)Tapping Shank Size 3.5 - 10 (mm)D 75 (mm)D1 28 (mm)L 150 (mm)L1 105 (mm)A 45 (mm)B 12 (kg)Nett Weight 4.2 -
-
Sale!5 piece tungsten carbide burr set - (double cut) suitable for steel, cast iron, light aluminium and non-ferrous metals
Shank Diameter x Length 1/4" x 6" (inch)Ball Diameter SD-3, 3/8"SD-5, 1/2"(inch)Cylindrical Radius End (Dia. x Length) SC-5 1/2" x 1" (inch)Tree Radius End (Dia. x Length) SF-5, 1/2" x 1" (inch)Tree Pointed End (Dia. x Length) SG-5, 1/2" x 1" -
Out of stock
- 72 x LED 5700K light provides daylight effect
- Dimmer control 10% -100%
- 2.25x clear magnification lens on centre of light head
- 800mm long arm permits the light to reach a large area
- 1.9 metre cord, 240V 10amp
- 230mm diameter light head
- Repositioning handle mounted to light
- 4 off, 6mm mounting hole at 45mm centres
- 37.5mm square aluminium tube mounted to base
- 25 x 16mm rectangular tube extension
- On/off switch mounted to lower arm near base
-
Sale!Include 3MT Fixed ArbourM6 - M14Suits drilling and milling machines
Features
- Clutch device permits smooth drive and reverse
- Pre-set depth control minimises possibility of tap breakage
- Cushioned drive prevents thread distortion and cross-threading when tapping in two operations
- Cushioned reverse provides smooth and vibration-free transition between forward and reverse drive
-
Sale!
Overview
Imperial Keyway Broach Set manufactured from HSS complete with bushes from 1/2" - 1 1/2" and packing shimsFeatures
- Supplied in aluminium case
- Weight: 4.55kg
Includes
- 4 x Broaches - 1/8", 3/16", 1/4", 3/8"
- 9 x Bushes - 1-1/2", 1-3/8", 1-1/4", 1-1/8", 1", 7/8", 3/4", 5/8", 1/2"
- 5 x Packing shims
-
Sale!Cast iron back plate finished machined on one side to fit D1-6 spindle nose. The other face and outside diameter need to be machined to suit chuck size.
Camlock D1-6 (mm)Flange Diameter Ø320 (mm)Bore Ø105 (kg)Nett Weight 22 -
Sale!Cast iron back plate finished machined on one side to fit D1-5 spindle nose. The other face and outside diameter need to be machined to suit chuck size.
Camlock D1-5 (mm)Flange Diameter Ø250 (mm)Bore Ø82 (kg)Nett Weight 8 -
Sale!Cast iron back plate finished machined on one side to fit D1-4 spindle nose. The other face and outside diameter need to be machined to suit chuck size.
Camlock D1-4 (mm)Flange Diameter Ø200 (mm)Bore Ø63 (kg)Nett Weight 7 -
Sale!
- Ground High Speed Steel