- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
| (mm / inch)Drawbar | 12mm |
|---|---|
| Taper | NT30 |
| (mm)D | 25.4 |
| (mm)C | 40 |
| (mm)G | M24 x P2 |
| (mm)L | 90 |
-
Sale!
-
Sale!
- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
(mm / inch)Drawbar 16mm Taper NT40 (mm)D 25.4 (mm)C 40 (mm)G M24 x P2 (mm)L 90 -
Sale!
Include 3MT & 4MT ArboursM5 - M12Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
- Clutch Torque Setting:
- 1 - 5 Nm
- 2 - 20 Nm
- 3 - 50 Nm
- 4 - 75 Nm
Includes
- MT3 & MT4 x JT6 arbors
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
Arbor Mount JT6 (MT)Taper 3 & 4 (mm)Tapping Range 5 - 12 (mm)Tapping Shank Size 3.5 - 10 (mm)D 75 (mm)D1 28 (mm)L 150 (mm)L1 105 (mm)A 45 (mm)B 12 (kg)Nett Weight 4.2 -
-
Sale!
250mm x 125mm120 (N/cm2) Magnetic ForceFeatures
- Cam-operated On/Off handle to hold and release the work-piece
- Powerful permanent magnets
- Thick top and base plate for maximum rigidity
- The fine pitched magnetic poles make it suitable for small and thin pieces.
- Includes rear keeper plate
Dimensions (L x W x H) 250 x 125 x 48 (N/cm2)Magnetic Force 120 (mm)P 1 + 3 (mm)L 250 (mm)B 125 (mm)H 48 (mm)T 20 (kg)Nett Weight 14 -
Sale!
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
-
- Clutch Torque Setting:
- 1 - 12 Nm
- 2 - 20 Nm
- 3 - 60 Nm
- 4 - 110 Nm
- Please Note: M20 tap requires a 14mm Shank
Includes
- MT3 & MT4 arbors - threaded end
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
MODEL T4-MT4 Arbor Mount Threaded (MT)Taper 3 & 4 (mm)Tapping Range 8 - 20 (mm)Tapping Shank Size 6.3 - 14 (mm)D 90 (mm)D1 38 (mm)L 195 (mm)L1 134 (mm)A 62 (mm)B 20 -
-
Sale!Out of stock
Features
- Brazed carbide tipped boring bar
- These sets contain a variety of different size bars for large and small bores
- 18mm shanks
-
Sale!
Features
- Brazed carbide tipped boring bar
- These sets contain a variety of different size bars for large and small bores
- 12mm shanks
-
Sale!
NOTE: Inserts not included Use insert TPMN1603Features
- 45º high speed chamfer cutter.
-
Sale!
3-13mm - 1/8"-1/2"Features
- Metal construction
- ER20 collets system 3 - 13mm
- CBN grinding wheel for HSS
- Can sharpen metric and imperial drill bits
- Precision grinding results with diamond wheel
- Grinds two flute drills of unlimited length
- Hand operated for easy operation - User friendly
- Chisel point and split point operations
- Angles from 90-135º
- Powerful 180W, 240V motor
Optional Accessories
- SDC grinding wheel for Carbide - (Order Code D1116)
-
Sale!
Parting Block Suits 26mm Blade 12mm Centre Height.Blade Size (h1) 26 x 2 or 26 x 3 (mm)h 12 (mm)b 16 (mm)L 87 -
Sale!Out of stock
- 72 x LED 5700K light provides daylight effect
- Dimmer control 10% -100%
- 2.25x clear magnification lens on centre of light head
- 800mm long arm permits the light to reach a large area
- 1.9 metre cord, 240V 10amp
- 230mm diameter light head
- Repositioning handle mounted to light
- 4 off, 6mm mounting hole at 45mm centres
- 37.5mm square aluminium tube mounted to base
- 25 x 16mm rectangular tube extension
- On/off switch mounted to lower arm near base
-
Sale!
5 piece tungsten carbide burr set - (double cut) suitable for steel, cast iron, light aluminium and non-ferrous metalsShank Diameter x Length 1/4" x 6" (inch)Ball Diameter SD-3, 3/8"SD-5, 1/2"(inch)Cylindrical Radius End (Dia. x Length) SC-5 1/2" x 1" (inch)Tree Radius End (Dia. x Length) SF-5, 1/2" x 1" (inch)Tree Pointed End (Dia. x Length) SG-5, 1/2" x 1"