-
Sale!Additional holder for QA-140 Quick Change Toolpost (L292) NOTE: Blades are not included. Takes a HSS Blade 5/8" x 3/32" x 5" Code L0116
-
Sale!Additional holder for QA-140 Quick Change Toolpost (code L292) Diamond knurling pattern
-
Sale!202mm Lathe Centre Height
Overview
Manufactured from carbonized and hardened steel. Italian design style.Features
- All bearing surfaces are precision ground to ensure rigidity
- Handy lathe accessory for tool rooms and general engineering shops
- Ease of operation cuts set-up time by 90%
- No shims are required to adjust tools to correct centre height
- Easily fitted to most centre lathes
- Please Note: Some machining required to suit your lathe
Includes
- 5 x Square Tool Holders - for 25mm tools
- 1 x Vee Tool Holders - for boring bars
Optional Accessories
- Holders - L294A
MODEL BR-BP (mm)Lathe Centre Height 202 (mm)Lathe Swing 404 (mm)A 15 (mm)B 13 (mm)C 90 (mm)D 115 (mm)H 38 - 53 (mm)h 75 (mm)S 28 (mm)T 25 (No.)Number of Sides 3 (No.)Number of Holders 6 (kg)Nett Weight 17.5 -
Sale!Cast iron back plate finished machined on one side to fit D1-6 spindle nose. The other face and outside diameter need to be machined to suit chuck size.
Camlock D1-6 (mm)Flange Diameter Ø320 (mm)Bore Ø105 (kg)Nett Weight 22 -
Sale!3-13mm - 1/8"-1/2"
Features
- Metal construction
- ER20 collets system 3 - 13mm
- CBN grinding wheel for HSS
- Can sharpen metric and imperial drill bits
- Precision grinding results with diamond wheel
- Grinds two flute drills of unlimited length
- Hand operated for easy operation - User friendly
- Chisel point and split point operations
- Angles from 90-135º
- Powerful 180W, 240V motor
Optional Accessories
- SDC grinding wheel for Carbide - (Order Code D1116)
-
Sale!
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
-
- Clutch Torque Setting:
- 1 - 12 Nm
- 2 - 20 Nm
- 3 - 60 Nm
- 4 - 110 Nm
- Please Note: M20 tap requires a 14mm Shank
Includes
- MT3 & MT4 arbors - threaded end
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
MODEL T4-MT4 Arbor Mount Threaded (MT)Taper 3 & 4 (mm)Tapping Range 8 - 20 (mm)Tapping Shank Size 6.3 - 14 (mm)D 90 (mm)D1 38 (mm)L 195 (mm)L1 134 (mm)A 62 (mm)B 20 -
-
Sale!250mm x 125mm120 (N/cm2) Magnetic Force
Features
- Cam-operated On/Off handle to hold and release the work-piece
- Powerful permanent magnets
- Thick top and base plate for maximum rigidity
- The fine pitched magnetic poles make it suitable for small and thin pieces.
- Includes rear keeper plate
Dimensions (L x W x H) 250 x 125 x 48 (N/cm2)Magnetic Force 120 (mm)P 1 + 3 (mm)L 250 (mm)B 125 (mm)H 48 (mm)T 20 (kg)Nett Weight 14 -
Sale!Include 3MT & 4MT ArboursM5 - M12
Features
-
- Pre-select torque drive to prevent tap breakage and allow for blind hole tapping
- Tension and compression feature compensates between rate of feed applied and thread pitch
- Suitable for right and left hand, vertical and horizontal tapping
- Fast tap reversal. Re-entry cushioning eliminates cross threading
- Clutch Torque Setting:
- 1 - 5 Nm
- 2 - 20 Nm
- 3 - 50 Nm
- 4 - 75 Nm
Includes
- MT3 & MT4 x JT6 arbors
- 2 x Collet chuck spanners
- 2 x Rubber flex collets
- 2 x allen keys
Arbor Mount JT6 (MT)Taper 3 & 4 (mm)Tapping Range 5 - 12 (mm)Tapping Shank Size 3.5 - 10 (mm)D 75 (mm)D1 28 (mm)L 150 (mm)L1 105 (mm)A 45 (mm)B 12 (kg)Nett Weight 4.2 -
-
Sale!
- Made of alloy steel for long, durable service life
- Hardened to HRC 56-60 and ground to ensure maximum accuracy
(mm / inch)Drawbar 16mm Taper NT40 (mm)D 25.4 (mm)C 40 (mm)G M24 x P2 (mm)L 90 -
Sale!
- Material: SCM-21
- Hardness: HRC 50º - 55º
-
Out of stock
- M6-M24 Taps and Dies
- 40 HSS Metric taps & dies - fine & coarse threads:
- M6x1.0, M6x0.75, M8x1.25, M8x1.0, M10x1.5, M10x1.25, M12x1.75, M12x1.5, M14x2.0, M14x1.5, M16x2.0, M16x1.5, M18x2.5, M18x1.5, M20x2.5, M20x1.5, M22x2.5, M22x1.5, M24x3.0, M24x1.5
- Includes: 50mm die handle, Die adaptor, Standard tap wrench, "T" type tap wrench & Screw driver
-
Sale!
- Material: SCM-21
- Hardness: HRC 50º - 55º