- PM-HSSE V3 Powder Metal technology offers superior performance
- Use in stainless steels and high strength steels
- Suitable for materials up to 850N/mm2
- Through holes
- Depths up to 3 x d1
- TiCN coating
- DIN371
- 6HX
- Tapping drill 6.8mm
-
Sale!
-
Sale!
- Suitable for use in wrought aluminium and low silicon aluminium
- Blind holes
- Depths up to 3 x d1
- CrN for longer tool life
- R45 helix angle
- DIN371
- ISO2/6H
- Tapping drill 6.8mm
-
Sale!
- For use in grey cast iron (GG)
- Through & blind holes
- Depths up to 3 x d1
- DIN371
- 6HX
- Tapping drill size 5.0mm
-
Sale!
- General purpose use
- Suitable for materials up to 1000N/mm2
- Blind holes
- Depths up to approx. 2.5 x d1
- Bright Finish
- Limit ISO2/6H
- Standard ISO529
- Tapping drill size 5.0mm
-
Sale!
- General purpose use
- Suitable for materials up to 1000N/mm2
- Through holes
- Depths up to approx. 3 x d1
- Bright Finish
- Limit ISO2/6H
- Standard: ISO529
- Tapping drill size 5.0mm
-
Sale!
- HSS-E Fluteless (Roll Form) Taps.
- Fluteless taps are also referred to as “Roll Form” or “Thread Flow” taps.
- Unlike standard taps, fluteless taps create internal threads by pressure deformation, rather than by material removal.
- As a result, no chips are formed as no material is removed.
- The thread is formed by the tap in the ductile material creating threads that have a smoother surface and greater tensile strength under dynamic stress than cut threads.
- It is essential to use a high quality lubricating fluid when using fluteless taps.
- Materials with a minimum elongation of 5% and a tensile strength no greater than 1,000 N/mm2 are suitable for thread forming.
- Metric Coarse angle of thread is 60 degrees.
- The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
- Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
- Recommended tapping drill: 5.6mm
-
Sale!
- Universal high performance tapping
- PM-HSSE V3 Powder Metal technology offers superior tool life
- Use in stainless steels and high strength steels up to 850N/mm2
- Deep blind holes
- Depths up to 3 x d1
- DIN371
- 6HX
- Tapping drill 5.0mm
-
Sale!
- PM-HSSE V3 Powder Metal technology offers superior performance
- Use in stainless steels and high strength steels
- Suitable for materials up to 850N/mm2
- Through holes
- Depths up to 3 x d1
- TiCN coating
- DIN371
- 6HX
- Tapping drill 5.0mm
-
Sale!
- Suitable for use in wrought aluminium and low silicon aluminium
- Blind holes
- Depths up to 3 x d1
- CrN for longer tool life
- R45 helix angle
- DIN371
- ISO2/6H
- Tapping drill 5.0mm
-
Sale!
- For use in grey cast iron (GG)
- Through & blind holes
- Depths up to 3 x d1
- DIN371
- 6HX
- Tapping drill size 4.2mm
-
Sale!
- General purpose use
- Suitable for materials up to 1000N/mm2
- Blind holes
- Depths up to approx. 2.5 x d1
- Bright Finish
- Limit ISO2/6H
- Standard ISO529
- Tapping drill size 4.2mm
-
Sale!
- General purpose use
- Suitable for materials up to 1000N/mm2
- Through holes
- Depths up to approx. 3 x d1
- Bright Finish
- Limit ISO2/6H
- Standard: ISO529
- Tapping drill size 4.2mm