-
Sale!
M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines. -
Sale!
30mm HSS Holemaker countersink with Weldon shank to suit magnetic based drilling machines. Size Maximum: 30mm Angle: 90° Shank Diameter: 3/4" (19.05mm) -
Sale!
M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines. -
Sale!
5PC Set contains 14, 16, 18, 20, 22mm cutters plus pilot pin TITANIUM NITRIDE COATING The Titanium Nitride coating significantly increases the tool life by providing the following benefits: • Increased surface hardness to 85HRC • Ceramic surface, reducing friction by up to 30% • Especially resistant to cold welding • Suitable for cutting a wide range of materials M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines. -
FEATURES
New generation machines with the latest technology and design.- New Rigid Frame Design Provides increased life of cutting tools.
- New Extra Large 165mm Stroke Enables the use of long tooling such as extension arbors and large depth cutters for drilling box section steel in one pass, twist drills, reamers, taps etc.
- Magnetic Field Shape Control (MFSC) Provides maximum holding power on thin materials.
- Lightweight & Powerful The new generation Holemaker machines are lighter and more powerful than other brands on the market.
- Multi-purpose machine able to use Holemaker cutters, no. 2 Morse taper shank drills & reamers, as well as a drill chuck
- Industrial 2-speed gearbox
- Cast-iron motor housing
- Through spindle coolant system, with an external side mounted gravity feed coolant tank
- Left or right hand feed handle operation
- Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience
- Smart magnet technology to ensure sufficient magnetic adhesion
- Supplied in a blow mould plastic carry case
- Suitable for steel fabrication, engineering workshops & maintenance facilities where a heavy-duty versatile machine is highly beneficial
- Supplied complete with arbor for use with Holemaker cutters up to 50mm depth of cut (3/4" shank)
- #2MT drill chuck SA20102 available separately
SPECIFICATIONS
- Capacity (Diameter): 52mm
- Capacity (Depth): 52mm
- Capacity (Twist Drills): #2 Morse Taper 23mm
- Motor Power: 1100 Watt
- Input Power: 1200 Watt Single Phase 240V
- Speed: 2 Speed 240 / 480rpm
- Weight: 16.5kg
- Magnetic Dead Lift: 9,900Nm On 25mm Steel Plate
- Stroke: 165mm
- Height (Min. / Max.): 456mm / 616mm
-
Sale!
- Cutter capacity : 42mm
- Cutter depth: 52mm
- Twist drill capacity* : 13mm
- Weight: 12.5kg
- 165mm stroke
- 1020watt 240V motor
- 440rpm
- 9,900nm adhesion on 25mm steel plate
-
Sale!
Capacity ( Diameter ): 36mm Capacity ( Depth ): 30mm Capacity ( Twist Drill ): 12mm Motor Power: 920 watt Input Power: 1000 watt Single Phase 240V Speed: 370rpm Weight: 9.5kg Magnetic Dead Lift: 8900Nm On 25mm Steel Plate Stroke: 39mm Height: 176mm Constant Working Height Through Spindle Coolant System Smart Magnet Technology To Ensure Sufficient Magnetic Adhesion Comes complete in plastic carry case The PRO 36 AD is an ultra-low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, where typical mag drills are too large. A powerful motor and strong electromagnetic base enable drilling of holes up to 36mm diameter to a depth of up to 30mm (1-3/16"). PRO-36 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4") Weldon shank. -
Arbor / adaptor: grub screw type Keyed drill chuck capacity: 13mm -
Pin Ø 6.34mm Overall Length 102mm -
Pin Ø 6.34mm Overall Length 77mm -
Sale!
M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
-
Sale!
M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED PROCESS This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters. MULTI-CUT GEOMETRY Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements. UNIVERSAL SHANK 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.