| W | 290 |
|---|---|
| (mm)H (Minimum) | 715 |
| (mm)H (Maximum) | 1050 |
-
-
W 450 (mm)H (Minimum) 505 (mm)H (Maximum) 800 -
W 290 (mm)H (Minimum) 505 (mm)H (Maximum) 800 -
W 450 (mm)H (Minimum) 715 (mm)H (Maximum) 1050 -
Sale!
Features
- 800kg capacity
- 580 to 970mm height adjustment
- Cast iron construction
- Single roller stand
- Ø52mm x 350mm steel roller
-
Sale!
Features
- 800kg capacity
- 580 to 970mm height adjustment
- Cast iron construction
- V-Type roller stand
- 2x (Ø52mm x 125mm) steel roller
-
PARTS WASHER CONCENTRATE - 20L MAKES 200L Hafco Parts Cleaner is a water-based, safer alternative to solvent based degreaser. It is formulated for cleaning and degreasing engineering and industrial parts and washable surface. For Engineering and industrial use Non Toxic Non Flammable Non Hazardous Non Caustic Direction for Use Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with portable water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Safety Precautions Keep out of reach of children. Avoid contact with eyes. Do not breathe the fumes/sprays. If swallowed, give water, contact your doctor, refer to material safety data sheet (Brochure.PDF). Contact poisons information centre 131 126 -
Sale!
Overview
Ideal for cleaning all types of partsFeatures
- Heavy duty welded steel unit offers plenty of room for medium size parts, features a removable shelf, a sealed recirculating motor and a flexible hose
- The hinged lid incorporates a fusible link that automatically shuts in the event of a flash fire
- The 240V pump provides a flow of approximately 180 Litres/hour
- 45 Litre fluid capacity
- Flexible fluid nozzle
- Tank size 700 x 480 x 250mm
-
Sale!
Recommended to be used with dust collectorOverview
Ideal for home or workshop useFeatures
-
- A must for abrasive cleaning and bead blasting of all types of parts
- Portable but rugged steel cabinet
- Acrylic protective screen with replaceable shield
- Complete with internal low-voltage light, extra replacement shield, gloves, gun and ceramic tips
- Recommended to be used with dust collector - (See Recommended Accessories)
- Recommended to use 1 x 25kg abrasive grit
- Please Note:
- When using a dust collector with sandblasters, it is very important to clean filter bag regularly
MODEL SB-100 (mm)Approx. Inside Cabinet Size (L x W x H) 590 x 500 x 300-360 (Type)Internal Light Fluorescent Light (LPM)Recommended Free Air Delivery @ 100psi 254 (mm)Floor Space with Door/Lid Open (L x W x H) 700 x 500 x 930 -
-
Features
-
- Roller capacity of 60kg each
- 10 x Zinc plated steel rollers at 150mm pitch
- Rollers are Ø50mm with commercial bearings
- Frames are powder coated
- Conveyor is pre-assembled with 4 cross-members
- Frames are pre-drilled at 75mm pitch to accept "Optional 9 rollers" totalling to 19 rollers
- Please Note:
- Roller load capacity is calculated on even weight distribution over entire roller
- Total load capacity is calculated on even weight distribution over entire roller conveyor system
MODEL RC-290S (kg)Roller Load Capacity - (each) 60 (kg)Total Load Capacity 600 (No.)Number of Rollers 10 (mm)Table Width (W) 290 (mm)Table Length (L) 1500 (mm)Roller Table Height (H) 80 (mm)Roller Diameter Ø50 -
-
Sale!
Overview
Ideal for cleaning all types of partsFeatures
- Heavy duty welded steel unit offers plenty of room for large size parts, features a removable shelf, a sealed recirculating motor and a flexible hose
- The hinged lid incorporates a fusible link that automatically shuts in the event of a flash fire
- The 240V pump provides a flow of approximately 180 Litres/hour
- 85 Litre fluid capacity
- Flexible fluid nozzle
- Tank size 1060 x 520 x 270mm
-
Suits Hafco & Thomas Cold Saws 250 - 350mm.- Bolt hole centres: 45mm
- Arm length: 33mm