Brands Hafco

Hafco 140 Litre Tank Parts Washer

$297.00 A374

Overview

Ideal for cleaning all types of parts

Features

Heavy duty welded steel unit offers plenty of room for large size parts, features a removable shelf, a sealed recirculating motor and a flexible hose
The hinged lid incorporates a fusible link that automatically shuts in the event of a flash fire
The 240V pump provides a flow of approximately 180 Litres/hour
85 Litre fluid capacity
Flexible fluid nozzle
Tank size 1060 x 520 x 270mm

Add to cart Details

Hafco 20L Parts Wash Concentrate

$143.00 A377

PARTS WASHER CONCENTRATE - 20L MAKES 200L Hafco Parts Cleaner is a water-based, safer alternative to solvent based degreaser. It is formulated for cleaning and degreasing engineering and industrial parts and washable surface. For Engineering and industrial use Non Toxic Non Flammable Non Hazardous Non Caustic Direction for Use Dilute the concentrate with cold or warm water. Apply solution with brush or dip the parts in the immersion wash tank for a few minutes. Brush and scrubbing may be required for difficult shapes and heavy soiled surfaces. Rinse with portable water and dry completely. Rust protection coating is required after washing process for ferrous metals before storage. Safety Precautions Keep out of reach of children. Avoid contact with eyes. Do not breathe the fumes/sprays. If swallowed, give water, contact your doctor, refer to material safety data sheet (Brochure.PDF). Contact poisons information centre 131 126

Add to cart Details

Hafco 22 Litre Tank Parts Washer

$99.00 A370

Overview

BENCH TYPE Ideal for cleaning all types of parts

Features

This portable fluid tank features a removable shelf, a sealed recirculating motor and a flexible hose
The 240V pump provides a flow of approximately 113 Litres/hour
12 Litre fluid capacity
Flexible fluid nozzle
Tank size 398 x 298 x 210mm

Add to cart Details

Hafco 225mm x 203mm x 165mm Swivel Angle Plate

$319.00 M200

Overview

Made of graded cast iron with precision-ground working surfaces

Features

Table adjustment to any angle from horizontal 0º to vertical 90º
Three machined T-Slots for easy mounting
Calibrated angle to 1 degree

Length	203
(mm)Width	255
(mm)Height	165
(mm)T-slot Size	14
(kg)Nett Weight	22

Add to cart Details

Hafco 290mm x 1.5M Roller Conveyor

$220.00 L8125

Features

- Roller capacity of 60kg each
- 10 x Zinc plated steel rollers at 150mm pitch
- Rollers are Ø50mm with commercial bearings
- Frames are powder coated
- Conveyor is pre-assembled with 4 cross-members
- Frames are pre-drilled at 75mm pitch to accept "Optional 9 rollers" totalling to 19 rollers

Please Note:
Roller load capacity is calculated on even weight distribution over entire roller
Total load capacity is calculated on even weight distribution over entire roller conveyor system

MODEL	RC-290S
(kg)Roller Load Capacity - (each)	60
(kg)Total Load Capacity	600
(No.)Number of Rollers	10
(mm)Table Width (W)	290
(mm)Table Length (L)	1500
(mm)Roller Table Height (H)	80
(mm)Roller Diameter	Ø50

CONTACT US TO PURCHASE Details

Hafco 290mm x 3M Roller Conveyor

$396.00 L812

Features

- Roller capacity of 60kg each
- 20 x Zinc plated steel rollers at 150mm pitch
- Rollers are Ø50mm with commercial bearings
- Frames are powder coated
- Conveyor is pre-assembled with 7 cross-members
- Frames are pre-drilled at 75mm pitch to accept "Optional 19 rollers" totalling to 39 rollers

Please Note:
Roller load capacity is calculated on even weight distribution over entire roller
Total load capacity is calculated on even weight distribution over entire roller conveyor system

MODEL	RC-290
(kg)Roller Load Capacity - (each)	60
(kg)Total Load Capacity	1200
(No.)Number of Rollers	20
(mm)Table Width (W)	290
(mm)Table Length (L)	3000
(mm)Roller Table Height (H)	80
(mm)Roller Diameter	Ø50

CONTACT US TO PURCHASE Details

Hafco 450mm x 3M Roller Conveyor

$473.00 L818

Features

- Roller capacity of 50kg each
- 20 x Zinc plated steel rollers at 150mm pitch
- Rollers are Ø50mm with commercial bearings
- Frames are powder coated
- Conveyor is pre-assembled with 7 cross-members
- Frames are pre-drilled at 75mm pitch to accept "Optional 19 rollers" totalling to 39 rollers

Please Note:
Roller load capacity is calculated on even weight distribution over entire roller
Total load capacity is calculated on even weight distribution over entire roller conveyor system

MODEL	RC-450
(kg)Roller Load Capacity - (each)	50
(kg)Total Load Capacity	1000
(No.)Number of Rollers	20
(mm)Table Width (W)	450
(mm)Table Length (L)	3000
(mm)Roller Table Height (H)	80
(mm)Roller Diameter	Ø50