- Key Steel - Zinc Coated.
- Key Steel is used to locate and provide driving torque between shafts and pulleys, gear, sprocket and couplings.
-
Sale!
- HSS Bright Finish BSB (Brass) Hand and Machine Intermediate Tap.
- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- British Standard Brass - brass tubing has a uniform wall thickness, irrespective of the tube diameter, therefore any thread cut on, or in, it needs to have the same depth, so 26 TPI is standard on all BSB diameters.
- BSB is often confused with BS Cycle thread, the difference being that brass thread has an angle of 55º whereas Cycle is 60º.
- Recommended tapping drill: 13.0mm
-
- BSP Internal & External Thread File - Goliath
- Filon premium quality Thread Restorer Files are manufactured in France
- Thread Files are a hardened steel four-sided bar with different thread pitches cut into the body and can be used for both external and internal threads.
- BSP Thread Files have a 55º thread angle and are suitable for repairing damaged British Standard Pipe threads.
- The depth of cut is self-limiting making thread restoration quick and simple.
- TPI: 28, 19, 14, 11 TPI
-
- Whitworth Internal & External Thread File - Goliath
- Filon premium quality Thread Restorer Files are manufactured in France
- Thread Files are a hardened steel four-sided bar with different thread pitches cut into the body and can be used for both external and internal threads.
- BSW (Whitworth) Thread Files have a 55º thread angle and are suitable for repairing damaged BSW and BSF threads.
- The depth of cut is self-limiting making thread restoration quick and simple.
- TPI: 10, 11, 12, 14, 16, 18, 20, 24 TPI
-
Sale!
- Button Die Holder to suit 13/16" O.D. Circular Button Dies.
- Button Die Holders, also known as a Die Stocks, are used to hold a round button during the process of cutting (or chasing) an external thread.
- Goliath button die holders can be used with solid or split button dies.
- Split button dies may be slightly compressed or expanded to provide some compensation for wear, or to achieve different classes of thread fit.
- Two screws in the stock bear in to indentations on either side of the slit, tending to squeeze the slit closed, whilst a third screw with a tapered tip screws in to the slit forcing it open.
-
Sale!
- 3" O.D. Die Stock - Goliath
- Button Die Holder to suit 3" O.D. Circular Button Dies.
- Button Die Holders, also known as a Die Stocks, are used to hold a round button during the process of cutting (or chasing) an external thread.
- Bordo button die holders can be used with solid or split button dies.
- Split button dies may be slightly compressed or expanded to provide some compensation for wear, or to achieve different classes of thread fit.
- Two screws in the stock bear in to indentations on either side of the slit, tending to squeeze the slit closed, whilst a third screw with a tapered tip screws in to the slit forcing it open.
- Long, alloy steel, knurled handles provide balance, control and good grip, even in the presence of cutting fluids.
-
Sale!These button dies and die nuts have a 60° angle of thread. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters). Manufactured from HSS this general purpose button die is designed for use in medium tensile materials .
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
-
Sale!
- 1/4" M1.6 - M6 (1/16" - 1/4") T-Handle Tap Wrench
- Size range M1.6-M6, 1/16"-1/4"
- Fixed handle with adjustable jaws.
- Holds hand taps, reamers and other square end tools.
- Ideal for use where space is restricted.
- Heavy duty hardened tool steel construction.
-
Sale!
- HSS Bright Finish Metric Fine Hand and Machine Taper Tap.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Metric Fine angle of thread is 60 degrees. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 9.0mm