- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Premium quality M2-HSS Tapping Jobber Drills.
- Taps (Taper/Inter/Bottom for each): M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, M12x1.75.
- Drills: 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.50MM, 10.20MM.
-
Sale!
-
Sale!
- 1/2" x 14 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 3/8" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.- BS949
- Tolerance CL2
- Overall length 229mm
- Thread length 83mm
- Tapping drill 17.5mm
-
Sale!
- 1/4" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/8" x 28 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.
- BS949
- Tolerance CL2
- Overall length 203mm
- Thread length 76mm
- Tapping drill 14.0mm
-
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.
- BS949
- Tolerance CL2
- Overall length 178mm
- Thread length 63mm
- Tapping drill 10.2mm
-
Sale!
- These general purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Premium quality M2-HSS Tapping Jobber Drills.
- Taps: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, M12x1.75.
- Drills: 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.50MM, 10.20MM.
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
-
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.
- BS949
- Tolerance CL2
- Overall length 150mm
- Thread length 51mm
- Tapping drill 8.5mm
-
Sale!
Machine Nut Taps are used where a long shank is needed. To ensure easy and precise use the Machine Nut Tap Taper lead has a unique, very long entering chamfer. This makes aligning the cutting end with the work piece simple.
- BS949
- Tolerance CL2
- Overall length 140mm
- Thread length 46mm
- Tapping drill 6.8mm