- General purpose use
- Set includes, Taper, Intermediate and Bottoming tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Finish: Bright
- Tolerance: Z3
-
Sale!
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
-
Sale!
- HSS Fluteless (Roll Form) Taps.
- Fluteless taps are also referred to as "Roll Form" or "Thread Flow" taps.
- Unlike standard taps, fluteless taps create internal threads by pressure deformation, rather than by material removal.
- As a result, no chips are formed as no material is removed.
- The thread is formed by the tap in the ductile material creating threads that have a smoother surface and greater tensile strength under dynamic stress than cut threads.
- It is essential to use a high quality lubricating fluid when using fluteless taps.
- Materials with a minimum elongation of 5% and a tensile strength no greater than 1,000 N/mm2 are suitable for thread forming.
- Metric Coarse angle of thread is 60 degrees.
- The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
- Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
- Recommended tapping drill: 9.3mm
-
Sale!
- Oversize allowance to suit components for galvanize plating
- General purpose use, materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx 1 x d1
- Taper and inter leads available on request
- Bright finish
- Standard: ISO529
- Nut tolerance: ISO2/6H
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Tolerance: 2B
- Finish: Bright
- Type: Straight Flute
-
Sale!
- General purpose use
- Set contains Taper, Intermediate and Bottoming
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
-
Sale!
- 3/8" x 18 NPS Taper HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Taper Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel - made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 14.5mm
-
Sale!
- 3/8" x 18 NPS Intermediate HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Intermediate Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel (made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 14.5mm
-
Sale!
- 3/8" x 18 NPS Bottoming HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Bottoming Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel - made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 14.5mm
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Tolerance: ISO2/6H
- Finish: Bright
- Type: Straight Flute
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Tolerance: 2B
- Finish: Bright
- Type: Straight Flute
-
Sale!
- General purpose use
- Set includes Taper, Intermediate and Bottoming Tap
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Suitable for both hand and machine operations
- Depths up to approx. 1 x d1
- Material: HSS
- Standard: ISO529
- Tolerance: 2B
- Finish: Bright
- Type: Straight Flute