-
M60 x 4.0 HSS Intermediate Tap -
M60 x 4.0 HSS Die Nut -
- Square AF Jaw Capacity M1(1mm) - M3.5(2.8mm)
- Body Length 50mm
- Width 57mm
-
- AF Square Jaw Capacity M2(2mm) - M6 (5mm)
- Body Length 65mm
- Width 90mm
-
- AF Square Jaw Capacity M4(3mm) - M12(8mm)
- Body Length 90mm
- Width 127mm
- -Adjustable Tommy Bar for Tapping Close to a Shoulder or Other Obstructions
-
- Square AF Jaw Capacity M5(4mm) - M12(7.1mm)
- Length 164 - 156mm
- Provides Comfortable & Positive Grip Plus the Sensitivity Required When Tapping a Blind Hole
- Knurled Locknut Ensures a Constant Grip
-
- Square AF Jaw Capacity M8(6.3mm) - M16(10mm)
- Length 230 - 220mm
- Provides Comfortable & Positive Grip Plus the Sensitivity Required When Tapping a Blind Hole
- Knurled Locknut Ensures a Constant Grip
-
Sale!
- 1/2" x 14 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/4" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/8" x 28 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 3/8" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
- BSP Internal & External Thread File - Goliath
- Filon premium quality Thread Restorer Files are manufactured in France
- Thread Files are a hardened steel four-sided bar with different thread pitches cut into the body and can be used for both external and internal threads.
- BSP Thread Files have a 55º thread angle and are suitable for repairing damaged British Standard Pipe threads.
- The depth of cut is self-limiting making thread restoration quick and simple.
- TPI: 28, 19, 14, 11 TPI
