-
M60 x 4.0 HSS Intermediate Tap -
Sale!
- LEFT HAND 1/4" x 20 TPI HSS Bright Finish British Standard Whitworth Hand and Machine Intermediate Tap.
- Recommended tapping drill diameter: 3/16"
-
Sale!
- LEFT HAND 3/16" x 24 TPI HSS Bright Finish British Standard Whitworth Hand and Machine Intermediate Tap.
- Recommended tapping drill diameter: 9/64"
-
Sale!
- LEFT HAND 3/8″ x 20 TPI HSS Bright Finish British Standard FINE Hand and Machine Intermediate Tap.
- Recommended tapping drill diameter: 21/64"
-
Sale!
- 1" x 11.5 NPT Bottoming HSS Tap - Goliath
- HSS Bright Finish NPT Hand and Machine Bottoming Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- National Pipe Tapered (NPT)is a US standard for tapered threads used to join pipes and fittings.
- ANSI/ASME standard B1.20.1 covers threads of 60º form with flat crests and roots.
- The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other.
- However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral.
- This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound.
- For each 12" increase in distance from the end, the diameter increases by 3/4".
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile.
- Recommended tapping drill: 29mm
-
Sale!
- 1/16" x 27 NPT Bottoming HSS Tap - Goliath
- HSS Bright Finish NPT Hand and Machine Bottoming Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- National Pipe Tapered (NPT)is a US standard for tapered threads used to join pipes and fittings.
- ANSI/ASME standard B1.20.1 covers threads of 60º form with flat crests and roots.
- The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other.
- However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral.
- This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound.
- For each 12" increase in distance from the end, the diameter increases by 3/4".
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile.
- Recommended tapping drill: 6.3mm
-
Sale!
- 1/2" x 14 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
-
Sale!
- 1/2" x 14 NPS Bottoming HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Bottoming Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel - made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 18.0mm
-
Sale!
- 1/2" x 14 NPS Intermediate HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Intermediate Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel (made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 18.0mm
-
Sale!
- 1/2" x 14 NPS Taper HSS Tap - Goliath
- HSS Bright Finish NPS Hand and Machine Taper Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- National Pipe Straight (NPS) - Parallel - made to American Standards).
- Used for free-fitting mechanical joints where thread sealing is not required.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
- Recommended tapping drill: 18.0mm
-
Sale!
- 1/2" x 14 NPT Bottoming HSS Tap - Goliath
- HSS Bright Finish NPT Hand and Machine Bottoming Tap.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- National Pipe Tapered (NPT)is a US standard for tapered threads used to join pipes and fittings.
- ANSI/ASME standard B1.20.1 covers threads of 60º form with flat crests and roots.
- The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other.
- However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral.
- This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound.
- For each 12" increase in distance from the end, the diameter increases by 3/4".
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general purpose tap is designed for use in medium tensile.
- Recommended tapping drill: 18.0mm
-
Sale!
- 1/4" x 19 BSPT HSS Tap Set - Goliath
- HSS Bright Finish BSPT Hand and Machine Tap Set.
- Pipe taps are much shorter than a similar size of regular hand tap, but the design features are the same.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
- Tapered Pipe Taps are used for tapered threading by hand or machine.
- British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º.
- BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
- The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
- The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
- Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
